Products and Services

  1. 2110 – 2170 MHz Linear Power Amplifier: SKY66184-11

    The SKY66184-11 is a 2110 – 2170 MHz high-linearity lower amplifier designed for FDD 3G/4G LTE small cell base stations that operate within the 2100 to 2200 MHz frequency range. It is also useful for active distributed antenna systems, cellular repeaters, and driver amplifiers. The amplifier features fully matched input/output, high gain, and an active biasing circuitry that is integrated to compensate its performance over temperature, voltage, and process variation.

  2. Power And Driver Amplifiers: Series AMP

    Millitech’s series AMP power amplifiers are designed to obtain high output power in the 18-110 GHz frequency range through the use of advanced PHEMT MMICs and transistors. These multiple MMIC amplifier chips can be combined or cascaded for applications requiring higher gain or greater output power than standard products.

  3. Ultra Wideband High Power Amplifier: BBS3G6QHM (SKU 2135)
    This high power amplifier is ideal for laboratory, RFI/EMC susceptibility testing, RF/MW component testing, and ultra broadband high power linear applications. It features 50 ohm input/output impedance, high reliability and ruggedness, suitability for CW, AM, and FM, a small form factor and a lightweight, built-in control, monitoring and protection circuits, and a solid-state Class A linear design.
  4. 35 MHz – 7.5 GHz GaN Solid Stated Power Amplifiers

    Fairview Microwave presents a line of solid state GaN power amplifiers (SSPAs) with an operating frequency range of 35 MHz – 7.5 GHz, and very high gain levels from 43 to 60 dB. Designed specifically to withstand environmental conditions such as humidity, altitude, shock and vibration, each amplifier features an operating temperature range from -40°C to +85°C.

  5. High Power RF Amplifiers: 700 MHz to 2.1 GHz

    Corry Micronics’ line of high power RF amplifiers feature up to 40% efficiency, an extended temperature range of -20oC to 55oC for MIL-STD applications, and status monitoring signals that provide diagnostic information.

  6. Solid State Broadband High Power Amplifier: Model 5228

    Ophir RF’s 5228 Solid State Broadband High Power RF Amplifier operates in the 80 to 1000 MHz frequency range and achieves high efficiency operation and proven reliability. This amplifier features an excellent 3rd order intercept point, high gain, and a wide dynamic range. All Ophir RF amplifiers come with an extended multiyear warranty. Download the available datasheet for additional information.

  7. 30 – 40 GHz Solid State Power Amplifier: PA3111V1

    The PA3111V1 is a solid state power amplifier (SSPA) designed with instantaneous wide bandwidth for operation within the 30 to 40 GHz frequency range. This SSPA includes a Class AB linear GaAsFET hybrid design that is suitable for all modulation standards.

  8. High Power Gallium Nitride (GaN) Amplifier: SSPA 2.0-4.0-100
    Aethercomm Model Number SSPA 2.0-4.0-100 is a high power, Gallium Nitride (GaN) amplifier that operates from 2000 MHz to 4000 MHz minimum and is packaged in a rugged enclosure. This amplifier is designed for operation in harsh environments. Typical output power is 100 watts across the band at P3dB. Small signal gain is 54 dB ± 3.0 dB across the band typically. Input and output VSWR is 2.0:1 maximum. This unit is equipped with DC switching circuitry that enables and disables the RF devices inside the amplifier in 540 nSec typical for turn on and 230 nSec typical for turn off time. Standard features include reverse polarity protection, output short and open circuit protection, and over/under voltage protection. There is a temperature sensor internal to this amplifier with thermal shut down to protect the unit.
  9. 1 To 18 GHz Microwave Power Amplifiers

    AR offers world class solid state power amplifiers designed for various EW, EMC and communication’s applications. You can have chip & wire hybrid modules from 0.7 - 6GHz to 100 watts or benchtops designs up to 500 watts CW. Benchtop units from 6-18 GHz are also available in 20 and 40 watts CW Class A models. For added versatility, AR can also supply dual band single housed units covering the full 1-18 GHz band with a high power of 60 watts up to 6 GHz and 40 watts from 6 – 18 GHz.

  10. Audio Power Amplifier: Model OPA101

    The OPHIREMC Model OPA101 is an audio power amplifier designed for conducted susceptibility testing within EMC standard Mil-Std-461, RTCA DO-160, and additional EMC specifications. Used in conjunction with the OPHIREMC Model OCT101 coupling transformer, this amplifier operates over the DC to 300 kHz frequency range and provides up to 200 W of output power.