Products and Services

  1. 7.5 – 18 GHz TWT Amplifier: dB-3911

    The dB-3911 power-combined TWT Amplifier (TWTA) uses two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. Compared to a single TWT approach, the dB-3911 provides higher saturated output power and improved harmonic performance.

  2. RF Amplifier System Tested To Mil STD 810: SKU 2126

    The new Model SKU 2126 from Empower RF is a rugged amplifier system that has undergone 40g shock testing while operating uninterrupted at full rated output power, and is suitable for octave bandwidth high power CW, modulated, and pulse applications. The system passed testing for MIL-STD-810E Method 514.4 vibration 40g Peak while operational for 270 minutes in each axis.

  3. S-Band GaN Solid State Power Amplifier (SSPA): VSS3607

    CPI’s Beverly Microwave Division presents the VSS3607 GaN solid state power amplifier (SSPAs) operating in the S-band (2.7 – 2.9 GHz). These high efficiency, high power, compact amplifiers are easy to maintain, and are designed for use in air surveillance radar applications.

  4. High Efficiency Pulsed Microwave Power Module: dB-3756HE And dB-3758HE

    The dB-3756HE and dB-3758HE high-efficiency pulsed microwave power modules (MPM) operates in the 9 to 10 GHz frequency range and provides 1 kW peak power at 20% maximum duty cycle. 

  5. High Efficiency Small Cell Power Amplifier: TQP9309

    The TQP9309 is a 0.5 Watt, two-stage power amplifier that provides 32 dB gain, and greater than 28 dBm of linear power. With on-chip bias control and temperature compensation circuitry, this amplifier is suitable for small cell base station applications.

  6. 2110 – 2170 MHz Linear Power Amplifier: SKY66184-11

    The SKY66184-11 is a 2110 – 2170 MHz high-linearity lower amplifier designed for FDD 3G/4G LTE small cell base stations that operate within the 2100 to 2200 MHz frequency range. It is also useful for active distributed antenna systems, cellular repeaters, and driver amplifiers. The amplifier features fully matched input/output, high gain, and an active biasing circuitry that is integrated to compensate its performance over temperature, voltage, and process variation.

  7. X-MWsystem

    The X-MWsystem from X-Microwave is a complete modular building block eco-system including a broad offering of RF and microwave components, an innovative Prototype Station and a FREE online System Simulator.  The X-MWsystem can be used to seamlessly navigate thru the product development process from simulation to prototype to production hardware.

  8. High Power Gallium Nitride (GaN) Amplifier: SSPA 2.0-4.0-100
    Aethercomm Model Number SSPA 2.0-4.0-100 is a high power, Gallium Nitride (GaN) amplifier that operates from 2000 MHz to 4000 MHz minimum and is packaged in a rugged enclosure. This amplifier is designed for operation in harsh environments. Typical output power is 100 watts across the band at P3dB. Small signal gain is 54 dB ± 3.0 dB across the band typically. Input and output VSWR is 2.0:1 maximum. This unit is equipped with DC switching circuitry that enables and disables the RF devices inside the amplifier in 540 nSec typical for turn on and 230 nSec typical for turn off time. Standard features include reverse polarity protection, output short and open circuit protection, and over/under voltage protection. There is a temperature sensor internal to this amplifier with thermal shut down to protect the unit.
  9. 60 – 90 GHz E-band Low-Noise Power Amplifier: AFB-E27HP-01

    Ducommun offers the AFB-E27HP-01 ultra-broadband, low-noise power amplifier (LNPA) that covers the millimeter-wave E-band (60 – 90 GHz) for applications such as research, telecommunications, astronomy, remote sensing and imaging, and test and medical instrumentation.

  10. High Power Amplifier: CBM-001860-DIE
    The CBM-001860-DIE is a wide bandwidth, two-stage high power amplifier capable of providing over 2 Watts of output power from 2.5 to 6 GHz. This amplifier is matched to 50Ω at both the input and output terminals and supports multiple operating drain voltages.