Products and Services

  1. DC-28 GHz GaAs pHEMT MMIC Power Amplifier: HMC994APM5E
    7/10/2017

    Analog Devices offers the new HMC994APM5E GaAs pHEMT MMIC distributed wideband power amplifier that is ideal for test instrumentation, military, space, and fiber optics applications. The amplifier operates within the DC to 28 GHz frequency range, and provides 15 dB of gain, +29 dBm of saturated output power, and 25% PAE from a +10V supply.

  2. Liquid Cooling For Large High-Power RF Amplifiers
    11/16/2016

    AR offers new CoolAR Chillers for any of its standard liquid-to-liquid cooled amplifiers. These chillers are made to guarantee amplifier performance in any operating condition, decrease the risk of unsuitably sized equipment, and simplify the purchasing process by working with only one vendor.

  3. Ultra Wideband High Power Amplifier: BBS3G6QHM (SKU 2135)
    2/8/2012
    This high power amplifier is ideal for laboratory, RFI/EMC susceptibility testing, RF/MW component testing, and ultra broadband high power linear applications. It features 50 ohm input/output impedance, high reliability and ruggedness, suitability for CW, AM, and FM, a small form factor and a lightweight, built-in control, monitoring and protection circuits, and a solid-state Class A linear design.
  4. High Efficiency Pulsed Microwave Power Module: dB-3756HE And dB-3758HE
    3/27/2018

    The dB-3756HE and dB-3758HE high-efficiency pulsed microwave power modules (MPM) operates in the 9 to 10 GHz frequency range and provides 1 kW peak power at 20% maximum duty cycle. 

  5. SSPA’s for Radar
    9/19/2017

    Empower RF Systems offers a wide range of power amplifiers and stand-alone or high-power amplifiers for an extensive range of radar applications, including HR for over-the horizon (OTH), VHF for very long range and ground penetration, and UHF for very long range and foliage penetration.

  6. GaN MMIC Power Amplifiers
    7/17/2013

    These GaN MMIC power amplifiers are ideal for applications involving test instrumentation, general communications, and general radar. Two models are featured below, a 25 Watt PA covering the 2-6 GHz frequency range, and an 8 Watt PA covering the 2-20 GHz frequency range.

  7. Broadband High Power RF Amplifier: 20 MHz to 1000 MHz
    10/15/2012

    Ophir RF’s 6010 broadband high power RF amplifier is ideal for NMR applications. It operates in the 20 to 1000 MHz frequency range and has a saturated output power of 125 Watts (min). It also has +52 dB (min) small signal gain, 50dB (min) blanking, <5uS blanking speed, -20 dBc (typ) harmonics @90 Watts, >-60 dBc (typ) @90 Watts, and much more. Additional specifications can be found on the available datasheet.

  8. Ka-Band Doubler with 1W Multi-stage Amplifier: TGC4603-SM
    9/28/2015

    The TGC4603-SM is a device comprised of a frequency doubler and a multi-stage amplifier designed for operation in the 13.5 – 16 GHz frequency range. This instrument is able to achieve more than 1 Watt of output power at only 3 dBm input power due to more than 70 dBc isolation between the input and doubled output frequency.

  9. 7.5 – 18 GHz TWT Amplifier: dB-3911
    9/11/2018

    The dB-3911 power-combined TWT Amplifier (TWTA) uses two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. Compared to a single TWT approach, the dB-3911 provides higher saturated output power and improved harmonic performance.

  10. 6 W Power Amplifier: MAAP-011140-DIE
    1/15/2016

    The MAAP-011140-DIE from MACOM is a 6 W, 4-stage amplifier in bare die form. With an operating frequency range from 27.5 to 30.0 GHz, 24 dB of linear gain, 6 W of saturated output power, and 23 percent efficiency while biased at 6 V, this power amplifier is ideally suited for VSAT communications.