Products and Services

  1. 27-31 GHz, 8 W GaN Power Amplifier: AHP-29043925-G1
    5/19/2016

    Ducommun presents the new Model AHP-29043925-G1 power amplifier with 8 W of voltage and operation in the 27-31 GHz frequency range. These newly developed amplifiers are designed to utilize GaN technology to achieve a small footprint with higher power, and provide a signal gain at 25 dB, and saturated power at 39 dBm.

  2. 81-86 GHz GaAs HEMT High Power Amplifier: APH667
    10/29/2012

    This high power amplifier operates in the 81 to 86 GHz frequency range, and is ideal for wireless fiber replacement, short haul/high capacity links, and enterprise wireless LAN applications. It features a 2 mil substrate, a 25.5 dBm (typ) power saturation, 17dB (typ) linear gain, 4 VDC @ 630 mA DC power, and an 11.07 sq. mm die size.

  3. High Power Amplifier Module: BBM5K8CKT (SKU 1191)
    1/30/2013

    This high power amplifier module covers the 2500 to 6000 MHz and is ideal for broadband jamming and high power linear applications in the S/C bands. It features built-in control and monitoring with protection functions, high power GaN on SiC transistors, and much more.

  4. High Efficiency Small Cell Power Amplifier: TQP9309
    5/5/2015

    The TQP9309 is a 0.5 Watt, two-stage power amplifier that provides 32 dB gain, and greater than 28 dBm of linear power. With on-chip bias control and temperature compensation circuitry, this amplifier is suitable for small cell base station applications.

  5. GaN MMIC Power Amplifiers
    7/17/2013

    These GaN MMIC power amplifiers are ideal for applications involving test instrumentation, general communications, and general radar. Two models are featured below, a 25 Watt PA covering the 2-6 GHz frequency range, and an 8 Watt PA covering the 2-20 GHz frequency range.

  6. SSPA’s for Radar
    9/19/2017

    Empower RF Systems offers a wide range of power amplifiers and stand-alone or high-power amplifiers for an extensive range of radar applications, including HR for over-the horizon (OTH), VHF for very long range and ground penetration, and UHF for very long range and foliage penetration.

  7. Broadband High Power RF Amplifier: 20 MHz to 1000 MHz
    10/15/2012

    Ophir RF’s 6010 broadband high power RF amplifier is ideal for NMR applications. It operates in the 20 to 1000 MHz frequency range and has a saturated output power of 125 Watts (min). It also has +52 dB (min) small signal gain, 50dB (min) blanking, <5uS blanking speed, -20 dBc (typ) harmonics @90 Watts, >-60 dBc (typ) @90 Watts, and much more. Additional specifications can be found on the available datasheet.

  8. Automatic Band-Switching RF Booster Amplifier For Tactical Radio: AR-125R
    5/18/2018

    AR Modular RF’s Model AR-125R is a fully automatic RF booster amplifier for VHF/UHF tactical radio equipment and supports legacy, proprietary and emerging networking waveforms including SINCGARS, HPW, HAVEQUICK, DAMA, IW, SRW and ANW2. Features include RF sensing, automatic T/R switching, Automatic Level Control (ALC), automatically switched harmonic filters and protection against antenna mismatch and over-temperature.

  9. 2-6 GHz Solid State Power Amplifier: PTS6900
    2/8/2016

    The new PTS6900 Solid State Power Amplifier (SSPA) from TMD is a low band CW amplifier operating within the 2 to 6 GHz frequency range, with nominal output power of 150 W, and 55 dB of gain. Utilizing the latest advances in 0.25 µm GaN MMIC technology and low loss power combiners, this amplifier is ideally used for EW/ECM applications.

  10. 60 – 90 GHz E-band Low-Noise Power Amplifier: AFB-E27HP-01
    6/22/2017

    Ducommun offers the AFB-E27HP-01 ultra-broadband, low-noise power amplifier (LNPA) that covers the millimeter-wave E-band (60 – 90 GHz) for applications such as research, telecommunications, astronomy, remote sensing and imaging, and test and medical instrumentation.