Products and Services

  1. 2 GHz Wi-Fi Medium Power Amplifier: QPA5219

    The QPA5219 is a three-stage power amplifier from Qorvo designed specifically for Wi-Fi applications, including those utilizing access points, wireless routers, and the Internet of Things. The amplifier’s performance is based on a balance of efficiency to linear power, which increases the range and throughput of connections.

  2. 6 W Power Amplifier: MAAP-011140-DIE

    The MAAP-011140-DIE from MACOM is a 6 W, 4-stage amplifier in bare die form. With an operating frequency range from 27.5 to 30.0 GHz, 24 dB of linear gain, 6 W of saturated output power, and 23 percent efficiency while biased at 6 V, this power amplifier is ideally suited for VSAT communications.

  3. High Power Gallium Nitride (GaN) Amplifier: SSPA 2.0-4.0-100
    Aethercomm Model Number SSPA 2.0-4.0-100 is a high power, Gallium Nitride (GaN) amplifier that operates from 2000 MHz to 4000 MHz minimum and is packaged in a rugged enclosure. This amplifier is designed for operation in harsh environments. Typical output power is 100 watts across the band at P3dB. Small signal gain is 54 dB ± 3.0 dB across the band typically. Input and output VSWR is 2.0:1 maximum. This unit is equipped with DC switching circuitry that enables and disables the RF devices inside the amplifier in 540 nSec typical for turn on and 230 nSec typical for turn off time. Standard features include reverse polarity protection, output short and open circuit protection, and over/under voltage protection. There is a temperature sensor internal to this amplifier with thermal shut down to protect the unit.
  4. High Linearity Small Cell Power Amplifiers

    Qorvo offers small cell high linearity power amplifiers that operate from 1.8 to 2.17 GHz, provides up to 0.5 W of saturated output power, and up to 31.5 dB of gain.

  5. 851 – 894 MHz Linear Power Amplifier: SKY66185-11

    The SKY66185-11 is an 851 – 894 MHz high-linearity lower amplifier designed for FDD 3G/4G LTE small cell base stations that operate within the 851 – 984 MHz frequency range. It is also useful for active distributed antenna systems, cellular repeaters, and driver amplifiers. The amplifier features fully matched input/output, high gain, and an active biasing circuitry that is integrated to compensate its performance over temperature, voltage, and process variation.

  6. 6 – 18 GHz, 200 W TWT Amplifier: dB-4139

    The dB-4139 TWT Amplifier (TWTA) is designed to operate within the 6 – 18 GHz frequency range and provide up to 200 W CW output power for electronic countermeasure (ECM), electronic warfare (EW) simulation, and multi-band communication applications.

  7. 100 W GaN Amplifier And Doherty Transistor For Wireless Infrastructures

    Qorvo offers the TGM2635-CP 100W GaN as an X-band, high power MMIC amplifier fabricated on Qorvo’s GaN on SiC Process. Its package is a 10-lead bolt-down with a cure Cu base for superior thermal management. Both RF ports allow for simple system integration, making the amplifier ideally suited for both military and commercial x-band radar systems and data links.

  8. Ultra Wideband High Power Amplifier: BBS3G6QHM (SKU 2135)
    This high power amplifier is ideal for laboratory, RFI/EMC susceptibility testing, RF/MW component testing, and ultra broadband high power linear applications. It features 50 ohm input/output impedance, high reliability and ruggedness, suitability for CW, AM, and FM, a small form factor and a lightweight, built-in control, monitoring and protection circuits, and a solid-state Class A linear design.
  9. Automatic Band-Switching RF Booster Amplifier For Tactical Radio: AR-20H

    AR Modular RF offers the AR-20H portable, fully automatic band-switching RF booster amplifier with remote keyline for multi-band VHF/UHF tactical radio equipment with legacy, proprietary, and emerging waveforms. Producing 20 Watts from a nominal 2 Watts CW/PEP radio input, the amplifier covers the frequency band of 30 – 512 MHz.

  10. 1 to 2.5 GHz High Power Amplifier In 8U Chassis

    The new Model 2180 from Empower RF is a high power RF amplifier system designed to cover the 1 to 2.5 GHz frequency range, and deliver 2 kW CW of broadband output power in an 8U, air cooled  chassis. The amplifier features unrivaled size, weight, and power advantages for many test and measurement, electronic warfare, and communication applications.