Oscillators

MtronPTI offers the new M6030/M6131 series of low phase-noise TCXOs operating from 60 to 125 MHz for GPS reference, military communications, and test and measurement applications. Featuring an optimal balance between close-in phase noise and the noise floor, these TCXOs are ideally suited to operate as a reference clock within these applications.

The Si549 Ultra Series™ crystal oscillator from Silicon Laboratories offers an ultra-low jitter, low phase noise clock at any output frequency through advanced 4^th generation DSPLL® technology. Featuring a phase jitter of only 95 femtoseconds, this oscillator is perfect for optical networking, 100G+ optical modules, coherent optics, broadband, data center, broadcast video, test and measurement, and FPGA/ASIC clocking applications.

MtronPTI offers the XO5503 Series of 100 MHz sinewave electronically vibration compensated OCXOs for use in airborne satellite communications and shipboard radar applications. These OCXOs incorporate an SC-cut quartz resonator and electronic vibration compensation resulting in 0.02 ppb/g g-sensitivity.

Greenray presents the T1254 series of radiation tolerant temperature compensated crystal oscillators (TCXOs) designed for applications in the 10.0 to 50.0 MHz frequency range. These highly rugged TCXOs deliver excellent performance in high shock and vibration environments.

MtronPTI introduces the XO517X Series of extended temperature, high stability OCXOs designed to be used as timing references for use in extreme environments. This series of oscillators delivers excellent temperature stability of less than +/-1.0ppb, over an operating temperature of -40°C to +90°C.

MtronPTI offers the XO8085 PLL OCXO platform with integrated multi-output frequency references, enabling system designers to employ one small package instead of using multiple OCXOs. This high-stability, ultra-low phase noise OCXO is characterized by low G-sensitivity, and provides a noise floor approaching -180dBc/Hz and close-in performance of -130dBc/Hz or better at 100 Hz offset.

The VS-800 is a voltage- controlled SAW oscillator designed to operate at the fundamental frequency of the internal SAW resonator. The SAW resonator is a high-Q Quartz device that enables the circuit to achieve ultra-low phase jitter performance over a wide operating temperature range.