Products and Services

  1. Class AB Linear Amplifiers: Series BHE
    1/11/2016

    The new Series BHE Amplifiers from Comtech PST are arranged in a wide variety of configurations with operating frequency ranges from 20 to 1000 MHz. These AB linear amplifiers are designed to provide load VSWR protection by way of an electronic power output turndown system employing negative feedback techniques. The system is self-correcting as a function of load VSWR to infinity, at any phase angle with a typical response time of 60 µsec.

  2. 7.5 – 18 GHz TWT Amplifier: dB-3911
    9/11/2018

    The dB-3911 power-combined TWT Amplifier (TWTA) uses two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. Compared to a single TWT approach, the dB-3911 provides higher saturated output power and improved harmonic performance.

  3. 33 – 47 GHz High Power Amplifier: ERZ-HPA-3300-4700-29
    10/4/2017

    ERZIA offers the new ERZ-HPA-3300-4700-29 high power amplifier that operates in the 33 to 47 GHz frequency range for industrial, laboratory, SATCOM, telecom, space, aerospace, and military applications. This amplifier features an output power of up to 29 dBm, gain of 30 dB, and a gain flatness of ±5 dB.

  4. High Gain, High Linearity Driver Amplifier: QPA9120
    10/10/2018

    Qorvo’s new QPA9120 is a high gain, high linearity driver amplifier able to operate over the 1.8 to 5.0 GHz frequency range. This amplifier features exceptional performance with 36 dBm output 3rd order intercept (OIP3) power and 22 dBm output 1dB compression (OP1dB) power while consuming less than 100 mA DC current with single 5V supply.

  5. Cellular Band High Power Amplifiers
    5/14/2018

    Corry Micronics, Inc. (CMI) offers a wide range of cellular band high-power amplifiers operating over the 900 MHz to 2,700 MHz frequency range for use in a variety of cellular applications. This family of amplifiers features high linearity, base station quality, low noise figure, and frequency modulation in GSM, LTE, and UMTS.

  6. 1-2 GHz Limiting Amplifier: SLA-020-60-25-SMA
    1/11/2016

    Fairview Microwave presents the SLA-020-60-25-SMA high-gain limiting coaxial amplifier with an operating frequency range from 1 to 2 GHz. Designed specifically to protect receivers from excessive power and distortion, this model features an input power range of -40 to +10 dBm, a minimum limited output power of +19 dBm, and a high 60 dB gain with gain flatness of +/-2.5 dB.

  7. 92-96 GHz HEMT High Power Amplifier: APH482
    10/29/2012

    This high power amplifier operates in the 92-96 GHz frequency range. It’s a two-stage power device, designed for use in commercial digital radios and wireless LANs. More specifically, it’s ideal for applications involving sensors and short haul/high capacity links.

  8. C-Band, High-Power Solid State Power Amplifier Module
    6/6/2017

    MtronPTI's PA4020X series of high-power solid state amplifier modules operates in the 2.5 to 4.8 GHz frequency range. The amplifier highlights a Class AB linear LDMOS-GaN design, an instantaneous wide bandwidth, and a rugged, high-reliability form factor that is suitable for all modulation standards.

  9. 2-6 GHz Solid State Power Amplifier: PTS6900
    2/8/2016

    The new PTS6900 Solid State Power Amplifier (SSPA) from TMD is a low band CW amplifier operating within the 2 to 6 GHz frequency range, with nominal output power of 150 W, and 55 dB of gain. Utilizing the latest advances in 0.25 µm GaN MMIC technology and low loss power combiners, this amplifier is ideally used for EW/ECM applications.

  10. S-Band GaN Solid State Power Amplifier (SSPA): VSS3617
    2/5/2016

    CPI’s Beverly Microwave Division presents VSS3617 GaN solid state power amplifiers (SSPAs) operating in the S-band (2.7 – 2.9 GHz). These high efficiency, high power, compact amplifiers are easy to maintain, and are designed for use as air traffic control radar transmitters.