Products and Services

  1. Ducommun GaAs MMIC Power Amplifiers
    6/22/2017

    Ducommun offers a range of GaAs Monolithic Microwave Integrated Circuit (MMIC) power amplifiers (PAs) for a variety of applications including satellite communications, point-to-point radios, and radar front applications in military and space markets.

  2. Radar Solutions
    11/24/2015

    Teledyne Microwave Solutions and its consolidated business units design and deliver advanced microwave technologies and services for the global radar market. Available radar solutions include a wide range of amplifiers, TWTs, Components, and integrated assemblies.

  3. Solid-State, Broadband, High-Power Amplifier
    10/28/2008
    The BBM3Q5KHM (SKU 1122) is suitable for broadband mobile jamming and band-specific high power linear applications in the P/L/S frequency bands. This compact module utilizes high power advanced GaN devices that provide excellent power density, high efficiency, wide dynamic range and low distortion.
  4. High-Performance Spatium® SSPA Technology
    6/16/2016

    Qorvo offers high-power, ultra-broadband performance, and solid state reliability when using the new Spatium® technology. This patented Spatium® RF power combining technology provides a highly reliable, efficient alternative to traveling wave tube amplifiers (TWTAs) for commercial and defense communications, radar, electronic warfare (EW), and other defense system applications.

  5. 4.4 – 5.0 GHz GaN Power Amplifier Module: QPA4501
    9/4/2018

    Qorvo’s QPA4501 is an integrated 2-stage Power Amplifier (PA) module designed to cover the frequency range of 4.4 to 5.0 GHz. This device is optimized for 5G massive MIMO, W-CDMA/LTE, macro and micro cell base station, active antenna, and other general purpose applications.

  6. High Linearity Small Cell Power Amplifiers
    5/11/2016

    Qorvo offers small cell high linearity power amplifiers that operate from 1.8 to 2.17 GHz, provides up to 0.5 W of saturated output power, and up to 31.5 dB of gain.

  7. 6 – 18 GHz, 200 W TWT Amplifier: dB-4139
    5/25/2018

    The dB-4139 TWT Amplifier (TWTA) is designed to operate within the 6 – 18 GHz frequency range and provide up to 200 W CW output power for electronic countermeasure (ECM), electronic warfare (EW) simulation, and multi-band communication applications.

  8. Skyworks CATV Amplifiers: ACA4788 And ACA2778
    8/20/2018

    Skyworks offers new models of CATV power amplifier modules designed for CATV applications with operating frequencies ranging from 50 to 1218 MHz.

  9. 3000 Watt CW, 80 - 1000 MHz Solid-State Amplifier: Model 3000W1000B
    3/28/2016

    The 3000W1000B self-contained, air-cooled, broadband, solid-state amplifier is ideal for applications where instantaneous bandwidth and high gain are required. When used with an RF sweep generator, this amplifier will nominally provide over 3000 watts of power. The device also utilizes push-pull circuitry in the interest of lowering distortion and improving stability.

  10. 100 Watt Wideband RF Power Amplifier: KAW2020M16
    7/6/2010

    The Model KAW2020M16 is a Class AB wideband RF power amplifier delivering in excess of 100 Watts into a 50-Ohm load over the frequency range of 220 MHz to 245 MHz. Power gain is a minimum of 50 dB minimum. The system features forward and reflected power indication on a front panel-mounted analog meter; over-drive protection; full VSWR protection, over-temperature protection, over-voltage, and over-current. System is CW rated with fast keying option less than 100nsec on/off time. The Model KAW2020M16 is a 19-inch rack-mount unit, 3.5 inches high and 20 inches deep. Construction is completely modular; all subassemblies are readily removable. The amplifier operates from 100-240 VAC, 47-63 Hz line.