Products and Services
-
High-Performance Front-End Module: SKY66408-11
8/1/2022
The SKY66408-11 is a high-performance, fully integrated RF front-end module (FEM) designed for Zigbee, Thread, and Bluetooth (including Low Energy) applications.
-
Sky5 Mid- And High Band Front-End Module: SKY58107-31
3/23/2023
The SKY58107-31 meets strict 5G NR and LTE advanced requirements where wider bandwidth (100 MHz) and carrier aggregation are used for higher data rates.
-
Sky5 Front-End Module for 4G and 5G Applications: SKY58277-31
3/23/2023
The SKY58277-31 Front-End Module (FEM) for LTE and NR is a new addition to the Skyworks Sky5 portfolio of 5G technology products. This versatile and fully matched FEM supports ultra-high band 4G/5G and LTE/NR applications.
-
R&S Front Ends: FE170ST & FE170SR
6/22/2023
The R&S® FE170ST and R&S® FE170SR are the perfect solution for early sub-terahertz and 6G research activities. Choose the FE170ST for signal generation and the FE170SR for signal analysis.
-
Mid- And High-Band Front-End Module For 3G, 4G, And 5G Applications: SKY5®-8085-11
11/20/2020
The SKY58085-11 is a mid- and high-band front end module (FEM) designed to support 3G/4G/5G mobile devices and operate efficiently in 3G/4G/5G modes. This model meets stringent 5G NR and LTE advanced requirements where wider bandwidth and carrier aggregation are utilized for high data rates.
-
24.25 - 27.5 GHz GaAs Front End Module: QPF4010
10/13/2020
The QPF4010 is a high frequency, high performance MMIC front-end module targeted for 5G - n258 at 26 GHz phased array base stations and terminals. It is fabricated on Qorvo's 90 nm pHEMT production process and combines a low noise high linearity LNA, a low insertion-loss high-isolation TR switch, and a high-efficiency multi-stage PA.
-
Sky5 5G NR n77 Diversity Receive Module: SKY53759-11
3/23/2023
The SKY53759-11 is a highly integrated LNA filter module that enables users to support new 5G New Radio (NR) bands in the 3.3 to 4.2 GHz frequency ranges.
-
5 GHz WLAN Front-End Modules
8/26/2022
Skyworks' 5 GHz WLAN Front-End Modules are highly efficient, highly integrated, 5 GHz front-end module (FEM) incorporating a 5 GHz single-pole, double-throw (SPDT) transmit/receive (T/R) switch, a 5 GHz low-noise amplifier (LNA) with bypass, and a 5 GHz power amplifier (PA) intended for 802.11ax applications and systems.
-
169 – 170 MHz Transmit/Receive Front-End Module: SKY66121-11
12/21/2020
The SKY66121-11 is a 169 – 170 MHz transmit/receive (T/R) front-end module designed to provide a complete T/R train with T/R switches. Mounted in a 16-pin, 6 x 6mm Multi-Chip Module (MCM) surface-mount technology package, this device provides a highly manufacturable low-cost solution for automated meter reading, advanced metering infrastructures, and ISM systems.
-
5 GHz C-V2X /DSRC/Wi-Fi Front End Module For Automotive Applications: QPF1003Q
10/13/2020
The QPF1003Q is an integrated front-end module (FEM) designed for multi-standard systems such as C-V2X, DSRC/11p, and Wi-Fi. The QPF1003Q integrates a 5 GHz power amplifier (PA), TX/RX Antenna switch and bypassable low noise amplifier (LNA) into a single device. The compact form factor and integrated matching ideally minimizes layout area in automotive applications.