Products and Services

  1. Wi-Fi Front End Modules 10/10/2018

    Qorvo’s integrated front end modules (FEMs) are included with a compact form factor and integrated matching that minimizes the layout area in Wi-Fi 802.11 a/n/ac and 802.11 b/g/n system applications. Their performance is focused on conserving power consumption while maintaining the highest linear output power and leading edge throughput.

  2. 9 – 10.5 GHz GaN T/R Module: QPM2637 2/12/2019

    he QPM2637 is a Gallium Nitride MMIC front-end module (FEM) designed for X-Band radar applications within the 9-10.5 GHz range. The MMIC combines a T/R switch, low-noise amplifier, and a power amplifier. The receive path has dual-outputs which offer 21dB gain and 2.7dB noise figure. The transmit path delivers 4W of saturated power with 23dB large signal gain. The FEM is robust up to 4W of input power into the ANT port eliminating the need for a limiter.

  3. 5G Massive IoT System-In-Package: SKY66431-11 3/23/2023

    The SKY66431-11 is a multi-band multi-chip System-in Package (SiP) supporting 5G Massive IoT (LTE-M/NB-IoT) platforms.

  4. 5 GHz Wi-Fi 6 Front End Module: QPF4551 1/12/2021

    Qorvo offers the QPF4551 integrated front end module (FEM) for Wi-Fi 6 (802.11ax) systems. With a compact form factor and integrated matching, this module minimizes the layout area required for its application. It is ideally used for access points, wireless routers, residential gateways, residential gateways, premise equipment, and Internet of Things applications.

  5. 5 GHz C-V2X /DSRC/Wi-Fi Front End Module For Automotive Applications: QPF1003Q 10/13/2020

    The QPF1003Q is an integrated front-end module (FEM) designed for multi-standard systems such as C-V2X, DSRC/11p, and Wi-Fi. The QPF1003Q integrates a 5 GHz power amplifier (PA), TX/RX Antenna switch and bypassable low noise amplifier (LNA) into a single device. The compact form factor and integrated matching ideally minimizes layout area in automotive applications.

  6. Front-End Modules For ZigBee®/Thread/Bluetooth® Applications 8/26/2022

    Skyworks' SKY66403-11, SKY66404-11, SKY66405-11, and SKY66112-11 are 2.4 GHz front-end Modules for Zigbee®, Thread, and Bluetooth® Applications.

  7. Dual-Channel Switch LNA Module: QPB9378 8/17/2022

    The QPB9378 is a highly integrated RF front-end module targeted for 5G TDD base stations. The module integrates a two-stage LNA and a high-power SPDT switch in a dual-channel configuration. 

  8. R&S Front Ends: FE170ST & FE170SR 6/22/2023

    The R&S® FE170ST and R&S® FE170SR are the perfect solution for early sub-terahertz and 6G research activities. Choose the FE170ST for signal generation and the FE170SR for signal analysis.

  9. 5 GHz LNA With LAA Support Front-End Module: SKY5®-5501-11 4/20/2020

    Skyworks offers the SKY55501-11 as a highly integrated, 5 GHz front-end module (FEM) that supports simultaneous 5G WLAN and licensed assisted access (LAA) systems. It incorporates a 5 GHz low-noise amplifier (LNA) with bypass supporting 5G WLAN and LAA simultaneous RX reception, and a single-pole, double-throw (SPDT) transmit/receive (T/R) switch.

  10. 5.9 GHz 802.11p DSRC High-Power Front-End Module: SKYA21043 11/20/2020

    The SKYA21043 is a highly integrated, 5 GHz front-end module (FEM) designed specifically for 802.11p V2V and V2X applications. The module incorporates a 5 GHz single-pole, double-throw (SPDT) transmit/receive (T/R) switch, a 5 GHz high-gain low-noise amplifier (LNA) with bypass, and a 5 GHz power amplifier (PA) intended for high-power 802.11p applications and systems.