Products and Services

31. 5 GHz Wi-Fi 6 Front End Module: QPF4568 9/14/2021

    The Qorvo® QPF4568 is an integrated front end module (FEM) designed for Wi-Fi 6 (802.11ax) systems. The ultra small form factor and integrated matching minimizes layout area in the application. 

32. 5 GHz C-V2X /DSRC/Wi-Fi Front End Module For Automotive Applications: QPF1003Q 10/13/2020

    The QPF1003Q is an integrated front-end module (FEM) designed for multi-standard systems such as C-V2X, DSRC/11p, and Wi-Fi. The QPF1003Q integrates a 5 GHz power amplifier (PA), TX/RX Antenna switch and bypassable low noise amplifier (LNA) into a single device. The compact form factor and integrated matching ideally minimizes layout area in automotive applications.

33. Wi-Fi Front End Modules 10/10/2018

    Qorvo’s integrated front end modules (FEMs) are included with a compact form factor and integrated matching that minimizes the layout area in Wi-Fi 802.11 a/n/ac and 802.11 b/g/n system applications. Their performance is focused on conserving power consumption while maintaining the highest linear output power and leading edge throughput.

34. 37 – 40.5 GHz GaN Front End Module: QPF4006 3/6/2018

    The QPF4006 from Qorvo is a multi-function GaN MMIC front-end module (FEM) ideally utilized for 39 GHz phased array 5G base stations and terminals. This device operates over the 37 to 40.5 GHz frequency range, and combines a low noise, high linearity LNA, a low insertion loss, high isolation TR switch, and a high gain, high efficiency multi-stage PA.

35. Low Profile, Multi-Band Massive IoT Front-End Module: SKY68031-11 1/25/2021

    The SKY68031-11 is a hybrid, multi-band multi-chip RF front-end (RFFE) module supporting LTE-M/NB-IoT transceiver platforms. The module integrates the entire RF front end necessary for an LTE multi-band radio operating in low-band and mid-band frequencies.

36. Mid- And High-Band Front-End Module For 3G, 4G, And 5G Applications: SKY5®-8085-11 11/20/2020

    The SKY58085-11 is a mid- and high-band front end module (FEM) designed to support 3G/4G/5G mobile devices and operate efficiently in 3G/4G/5G modes. This model meets stringent 5G NR and LTE advanced requirements where wider bandwidth and carrier aggregation are utilized for high data rates.

37. Front End Module For Wi-Fi 5 (802.11ac) Systems: QPF4219 4/30/2019

    Qorvo offers the QPF4219 integrated front end module (FEM) for Wi-Fi 5 (802.11ac) systems. The QPF4219 integrates a 2.4 GHz power amplifier (PA), regulator, single pole two throw switch (SP2T), bypassable low noise amplifier (LNA) and DC power detector into a single device. With a compact form factor and integrated matching, this module minimizes the layout area required for its application.

38. 2.4 GHz Wi-Fi 6 bandBoost Integrated Front End Module: QPF7250 2/13/2023

    The Qorvo QPF7250 is an integrated front end module (iFEM) designed for Wi-Fi 6 (802.11ax) systems which marries the advantages of active components with edgeBoost filter technology.

39. 5 GHz Wi-Fi 6 Front End Module: QPF4551 1/12/2021

    Qorvo offers the QPF4551 integrated front end module (FEM) for Wi-Fi 6 (802.11ax) systems. With a compact form factor and integrated matching, this module minimizes the layout area required for its application. It is ideally used for access points, wireless routers, residential gateways, residential gateways, premise equipment, and Internet of Things applications.

40. Sky5 Low Band Tx-Rx Front-End Module: SKY58101-11 3/23/2023

    The SKY58101-11 Sky5 Multimode Multiband Tx-Rx Front- End Module (FEM) supports 2G/3G/4G/5G mobile devices and operates efficiently in 3G/4G/5G modes.