Products and Services

  1. 2.4 GHz Front-End Module For ZigBee®, Thread, And Bluetooth® Smart Applications: SKY66112-11
    12/8/2016

    The SKY66112-11 is a 2.4 GHz fully integrated RF Front End Module (FEM) designed to deliver high performance in ZigBee®, Thread, And Bluetooth® Smart applications such as in-home appliances, smart thermostats, IoT devices, smart lighting, sensors, and range extenders.

  2. Front End Module (FEM) for WiMAX Applications: RFFM7600
    5/21/2012

    This Front End Module (FEM) is ideal for applications involving WiMAX, LTE TDD, Customer Premises Equipment (CPE), Data Card and Terminals, and Spread-Spectrum and MMDS Systems.

  3. ZigBee®/Smart Energy Front-End Modules
    10/10/2012

    These 2.4 GHz RF Front-End-Modules (FEMs) have been designed for use in ZigBee®/smart energy and 802.15.4 applications. Their integrated RF blocks operate over a supply voltage range of 2.0 V to 3.6 V, allowing them to be used in battery-powered applications. These FEMs feature integrated inter-stage matching and harmonic filter, and digital controls compatible with 1.6 – 3.6 volt (V) complementary metal oxide semiconductor levels.

  4. 2.4 GHz Front-End Modules For Bluetooth® Low Energy/802.15.4/ZigBee®
    1/20/2017

    The SKY66113-11 and SKY66114-11 are 2.4 GHz fully integrated RF Front-end Modules (FEMs) designed to deliver high performance in Bluetooth Low Energy/Bluetooth Smart, 802.15.4, Thread, and ZigBee applications such as in smart thermostats, in-home appliances, beacons, gateways, sensors, and wearable devices.

  5. RF5345 - 3.3 V, Single-Band Front-End Module
    3/12/2009

    The RF5345 FEM is a single-chip integrated front-end module (FEM) for high-performance WLAN applications in the 2.4GHz to 2.5GHz ISM band. The FEM addresses the need for aggressive size reduction for a typical IEEE802.11b/g front-end design and greatly reduces the number of components outside of the core chipset.

  6. A Complete Solution: SKY85806-11 WLAN Front-end Module
    2/20/2015

    This wireless front-end-module features the functionality of a power amplifier, a power detector, a transmit/receive T/R) switch, and a diplexer with additional filtering and associated matching functionality. It’s been designed to provide a complete 2.4 GHz to 5 GHz WLAN RF solution in a QFN 28-pin, 4.0 x 3.0 x 0.8 mm package.

  7. ALM-1712 - GPS RF Front End Module With FBAR Filters
    12/2/2008
    Avago Technologies’ ALM-1712 is a GPS front-end module that combines a low-noise amplifier (LNA) with GPS FBAR filters. The LNA uses Avago Technologies’ proprietary GaAs Enhancement-mode pHEMT process to achieve high gain with very low noise figure and high linearity.
  8. GNSS Filter/LNA Front End Module: ANGP-F001
    9/26/2012

    The ANGP-F001 combines a low-noise amplifier (LNA) with a GNSS FBAR pre-LNA filter. This module features a very low noise figure, a CMOS compatible shutdown pin (SD), advanced GaAs E-pHEMT and FBAR technology, exceptional Cell/DCS/PCS/WLAN-Band rejection, and more.

  9. 3.3V 5GHz 802.11a/n Front-End Module: RF5516
    10/3/2011
    RFMD’s RF5516 3.3V 5GHz 802.11a/n Front-End Module features a single supply voltage of 3.0V to 4.8V, an integrated 5Ghz Amplifier, an LNSA, and a SPT2T TX/RX Switch. It’s ideal for IEEE802.11a WiFi, and 5GHz ISM Band applications, and with portable battery powered equipment.
  10. Miniature FEMs for 2.5G and 3G/4G Handsets: SkyOne™ Mini
    3/28/2015

    Skyworks’ SkyOne™ is a family of scalable Front-end-modules (FEMs) that integrate all of the high-performance RF and analog content between a transceiver and antenna. This platform supports carrier aggregation, additional frequency bands, and industry-leading baseboards with MIPI® interfaces, and the SkyOne® Mini is designed for those looking for the full functionality it provides, but at a reduced cost and size.