Products and Services

  1. Mid- And High-Band Front-End Module For 3G, 4G, And 5G Applications: SKY5®-8085-11 11/20/2020

    The SKY58085-11 is a mid- and high-band front end module (FEM) designed to support 3G/4G/5G mobile devices and operate efficiently in 3G/4G/5G modes. This model meets stringent 5G NR and LTE advanced requirements where wider bandwidth and carrier aggregation are utilized for high data rates.

  2. 24.25 - 27.5 GHz GaAs Front End Module: QPF4010 10/13/2020

    The QPF4010 is a high frequency, high performance MMIC front-end module targeted for 5G - n258 at 26 GHz phased array base stations and terminals. It is fabricated on Qorvo's 90 nm pHEMT production process and combines a low noise high linearity LNA, a low insertion-loss high-isolation TR switch, and a high-efficiency multi-stage PA.

  3. 37 – 40.5 GHz GaN Front End Module: QPF4006 3/6/2018

    The QPF4006 from Qorvo is a multi-function GaN MMIC front-end module (FEM) ideally utilized for 39 GHz phased array 5G base stations and terminals. This device operates over the 37 to 40.5 GHz frequency range, and combines a low noise, high linearity LNA, a low insertion loss, high isolation TR switch, and a high gain, high efficiency multi-stage PA.

  4. 8 - 12 GHz 5 Watt Transmit / Receive Module: QPF5005 3/7/2023

    QPF5005 is a multi-die front-end module (FEM) designed for 8 - 12 GHz X-Band applications.

  5. Wi-SUN Front-End Module: SKY66122-11 6/14/2021

    The SKY66122-11 is a high-performance, highly integrated RF front-end module (FEM) designed for high-power Industrial, Scientific, Medical (ISM) band, Wi-SUN, and other IOT applications operating in the 863 to 928 MHz frequency range.

  6. Front End Module And Low Noise Amplifiers For Wi-Fi Applications 9/13/2016

    Qorvo offers a front end module (FEM) and two low noise amplifiers (LNAs) designed specifically for Wi-Fi applications such as access points and wireless routers.

  7. Sky5 LB/MLB/MB/HB Diversity Receive Module: SKY53746-11 3/23/2023

    The SKY53746-11 is a diversity receive module and is scalable to support two CA MIMO regional and roaming band requirements. The SKY53746-11 is part of our Sky5 product portfolio. 

  8. 5 GHz C-V2X /DSRC/Wi-Fi Front End Module For Automotive Applications: QPF1003Q 10/13/2020

    The QPF1003Q is an integrated front-end module (FEM) designed for multi-standard systems such as C-V2X, DSRC/11p, and Wi-Fi. The QPF1003Q integrates a 5 GHz power amplifier (PA), TX/RX Antenna switch and bypassable low noise amplifier (LNA) into a single device. The compact form factor and integrated matching ideally minimizes layout area in automotive applications.

  9. 2 - 18 GHz 10 Watt Transmit/Receive Module: QPF0219 6/7/2023

    QPF0219 is a multi-chip Front-End Module (FEM) designed for 2-18 GHz Wide-Band radar applications. The FEM integrates a T/R switch, a limiter, a low-noise amplifier and a power amplifier.

  10. Dual-Channel Switch LNA Module: QPB9318 3/17/2017

    Qorvo offers the new QPB9318 highly integrated front-end module with operation in the 2.3 – 2.8 GHz frequency range for TDD base station, wireless infrastructure, small cell BTS, and pre-5G/5G massive MIMO applications. This LNA module integrates a two-stage LNA and a high power switch in a dual-channel configuration.