Products and Services

  1. 8.5 – 10.5 GHz GaN T/R Module: QPM1002 9/17/2018

    Qorvo introduces the new QPM1002 GaN MMIC front-end module (FEM) designed specifically for X-band radar applications in the 8.5 – 10.5 GHz frequency range. Combining a T/R switch, low-noise amplifier, and a power amplifier, this device delivers a small signal gain of 33 dB, delivers 3 W of saturated power, and 25 dB of large signal gain.

  2. Front-End Modules For Wi-Fi 6 (802.11ax) Applications 6/17/2020

    The SKY85334-11 and SKY85750-11 are 2.4 GHz and 5 GHz front-end modules (FEMs) respectively, and compliment Skyworks' expansive portfolio of FEMs designed for growing retail, carrier and enterprise Wi-Fi 6 applications. The modules offer high linearity, low power dissipation, and efficiency for access points, routers and gateways where regulatory, thermals or Power-over-Ethernet limitations demand low current consumption. These highly integrated FEMs incorporate switching, low-noise amplifier (LNA) with bypass and power amplifier (PA) and are housed in a compact package. 

  3. 5.9 GHz 802.11p DSRC High-Power Front-End Module: SKYA21043 11/20/2020

    The SKYA21043 is a highly integrated, 5 GHz front-end module (FEM) designed specifically for 802.11p V2V and V2X applications. The module incorporates a 5 GHz single-pole, double-throw (SPDT) transmit/receive (T/R) switch, a 5 GHz high-gain low-noise amplifier (LNA) with bypass, and a 5 GHz power amplifier (PA) intended for high-power 802.11p applications and systems.

  4. Dual-Frequency Low-Noise Amplifier Front-End Module With Post-Filter: SKY55951-11 8/5/2022

    The SKY55951-11 front-end module (FEM) features an integrated L1 low-noise amplifier (LNA) and post-filter along with an L5 LNA and post-filter designed for Global Navigation Satellite System (GNSS) receiver applications.

  5. Wi-Fi 6E High Power Front End Module: QPF4656 9/16/2022

    The Qorvo QPF4656 is an integrated front end module (FEM) designed for Wi-Fi 6 & 6E (802.11ax) systems. The small form factor and integrated matching minimizes layout area in the application.

  6. Dual-Channel Switch LNA Module: QPB9318 3/17/2017

    Qorvo offers the new QPB9318 highly integrated front-end module with operation in the 2.3 – 2.8 GHz frequency range for TDD base station, wireless infrastructure, small cell BTS, and pre-5G/5G massive MIMO applications. This LNA module integrates a two-stage LNA and a high power switch in a dual-channel configuration.

  7. Dual 2.4 GHz, 802.11ax High-Linearity, High-Efficiency Front-End Module: SKY5®-5242-11 4/30/2020

    Skyworks offers the SKY5®-5242-11 dual 2.4 GHz, 802.11ax high-linearity, high-efficiency front-end module (FEM) specifically designed for Wi-Fi 6 enabled devices including handsets, tablets, and mobile devices supporting WLAN and Bluetooth® protocols.

  8. R&S Front Ends: FE170ST & FE170SR 6/22/2023

    The R&S® FE170ST and R&S® FE170SR are the perfect solution for early sub-terahertz and 6G research activities. Choose the FE170ST for signal generation and the FE170SR for signal analysis.

  9. 26 – 30 GHz, 1W GaN Front End Module: QPF4001 11/28/2018

    The QPF4001 from Qorvo is a multi-function GaN MMIC front-end module (FEM) ideally utilized for 28 GHz phased array 5G base stations and terminals. This device operates over the 26 to 30 GHz frequency range, and combines a low noise, high linearity LNA, a low insertion loss, high isolation TR switch, and a high gain, high efficiency multi-stage PA.

  10. Front End Module For Wi-Fi 5 (802.11ac) Systems: QPF4219 4/30/2019

    Qorvo offers the QPF4219 integrated front end module (FEM) for Wi-Fi 5 (802.11ac) systems. The QPF4219 integrates a 2.4 GHz power amplifier (PA), regulator, single pole two throw switch (SP2T), bypassable low noise amplifier (LNA) and DC power detector into a single device. With a compact form factor and integrated matching, this module minimizes the layout area required for its application.