Services and Products

  1. 20-520 MHz Solid State Broadband High Power Amplifier: BBM2E3KLP (SKU 1163)

    In UHF/VHF frequency bands, the BBM2E3KLP (SKU 1163) high power amplifier can be used as a broadband PA building block in electronic attack, digital communications, and test and measurement applications.

  2. Solid-State Microwave Amplifiers

    AR’s solid state amplifier family provides you with the power (1 – 800 watts) and frequency (0.8 to 18 GHz) needed for wireless and EMC testing. These amplifiers boast low spurious signals, noise figures and distortion. They also generate 100% rated power and make it available to the load even when mismatch is severe. In addition, many of the amplifiers is this family allow you to upgrade your existing amplifier to higher power without purchasing new amplifiers as part of the “Subampability” concept.

  3. 6 – 18 GHz Amplifiers With New Internal Liquid Cooling: 20S6G18-L And 40S6G18-L

    AR’s new 20S6G18-L and 40S6G18-L are self-contained broadband, Class A solid-state amplifiers with a new internal liquid cooling design. The 20S6G18-L, when used with a sweep generator provides a minimum output power of 20 watts instantaneously from 6 to 18 GHz, while the 40S6G18-L version delivers 40 watts. Typical applications include radiated and conducted immunity testing, TWTA replacements, and EW.

  4. 350 Watt CW 0.7-6.0 GHz Solid-State Amplifier: 350S1G6

    AR’s 350S1G6 is a solid-state broadband amplifier covering the 0.7 to 6.0 GHz frequency range. When used with a sweep generator, this Class A, self-contained, air-cooled amplifier provides a minimum of 350 watts RF power. The low level of spurious signals and linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems.

  5. Amplifier Module: 2110-2170MHz (50 Watts): GCM5C5DHO (SKU 3114)
    This is a compact, high power amplifier module with stop frequencies from 2110 MHz to 2170 MHz ideal for broadband mobile jamming and band specific high power linear applications. It features high reliability and ruggedness, a small form factor along with a light weight, built in control, monitoring, and protection circuits, 50 ohm input/output impedance, a solid-state class AB linear design, and more. High power advanced GaN devices are used in order to achieve good power density, high efficiency, a wide dynamic range, and low distortions.
  6. Solid-State Power Amplifier For Wireless Broadband Network: KMS2010
    AR Modular RF has introduced a new solid-state power amplifier module for the wireless broadband network. Model KMS2010 (1.75 GHz - 1.85 GHz, 150 watts) is a 52 dBm linear power amplifier with a scaleable gain of 57 dB. It is designed to meet most communication protocols, including various types of OFDM.
  7. X-Band Solid-State Power Amplifier: SSPA 9.0-10.0-40
    Aethercomm Part Number SSPA 9.0-10.0-40 is a high power, X band, Solid State Power Amplifier that operates from 9.0 to 10.0 GHz. The saturated output power is 40 watts typical at 25ºC. Typical small signal gain is 58 dB. Noise Figure is 10.0 dB typical at 25ºC. Input VSWR is 2.0:1 maximum. Output VSWR is 2.0:1 maximum.
  8. 80-1000 MHz Solid-State Amplifier: 1000W1000F

    This self-contained solid-state amplifier covers the 80 MHz to 1000 MHz frequency range and features lowered distortion and improved stability through the use of push-pull circuitry. When used in conjunction with an RF sweep generator, this amplifier can provide 1000 watts (min) of swept power.

  9. X-Band, Solid-State Power Amplifier: SSPA 9.5-10.5-25
    Aethercomm Part Number SSPA 9.5-10.5-25 is a high power, X Band, Solid State Power Amplifier that operates from 9.5 to 10.5 GHz. The P1dB at 25ºC is 20 watts typical. The saturated output power is 30 watts typical at 25ºC. Minimum small signal gain is 45 dB. Typical gain flatness is ±2.0 dB across the band. Noise Figure is 5.5 dB typical at 25ºC. Input VSWR is 2.0:1 maximum. Output VSWR is 2.0:1 maximum.
  10. 30 – 40 GHz Solid State Power Amplifier: PA3111V1

    The PA3111V1 is a solid state power amplifier (SSPA) designed with instantaneous wide bandwidth for operation within the 30 to 40 GHz frequency range. This SSPA includes a Class AB linear GaAsFET hybrid design that is suitable for all modulation standards.