Services and Products

  1. 1.0 GHz to 4.0 GHz Dual Band Solid State Amplifiers: AS0104 Series
    8/30/2012

    This series of solid state amplifiers have been designed to cover the 1.0 GHz to 4.0 GHz frequency range in two bands (1 GHz to 2 GHz and 2 GHz to 4 GHz). Several models are available with 30W/17W, 30W/30W, 55W/17W, 55W/30W, 55W/55W, 100W/17W, 100W/55W, 100W/100W, 200W/100W, 200W/200W, 400W/100W, and 400W/200W P1dB levels. Information on specifications can be accessed on the datasheets below.

  2. Solid State Broadband High Power RF Amplifier: Model 5163
    1/7/2016

    The new model 5163 from Ophir RF is a 50 Watt solid state broadband amplifier designed to cover the 0.8 to 4.2 GHz frequency range. This high power, compact amplifier features excellent 3rd order intercept point, high gain, and a wide dynamic range from its use of Class A/B linear power devices.

  3. High-Performance Spatium® SSPA Technology
    6/16/2016

    Qorvo offers high-power, ultra-broadband performance, and solid state reliability when using the new Spatium® technology. This patented Spatium® RF power combining technology provides a highly reliable, efficient alternative to traveling wave tube amplifiers (TWTAs) for commercial and defense communications, radar, electronic warfare (EW), and other defense system applications.

  4. 2-6 GHz Solid State Power Amplifier: PTS6900
    2/8/2016

    The new PTS6900 Solid State Power Amplifier (SSPA) from TMD is a low band CW amplifier operating within the 2 to 6 GHz frequency range, with nominal output power of 150 W, and 55 dB of gain. Utilizing the latest advances in 0.25 µm GaN MMIC technology and low loss power combiners, this amplifier is ideally used for EW/ECM applications.

  5. Solid State Broadband High Power Amplifier: Model 5228
    7/18/2012

    Ophir RF’s 5228 Solid State Broadband High Power RF Amplifier operates in the 80 to 1000 MHz frequency range and achieves high efficiency operation and proven reliability. This amplifier features an excellent 3rd order intercept point, high gain, and a wide dynamic range. All Ophir RF amplifiers come with an extended multiyear warranty. Download the available datasheet for additional information.

  6. 3000 Watt CW, 80 - 1000 MHz Solid-State Amplifier: Model 3000W1000B
    3/28/2016

    The 3000W1000B self-contained, air-cooled, broadband, solid-state amplifier is ideal for applications where instantaneous bandwidth and high gain are required. When used with an RF sweep generator, this amplifier will nominally provide over 3000 watts of power. The device also utilizes push-pull circuitry in the interest of lowering distortion and improving stability.

  7. C-Band, High-Power Solid State Power Amplifier Module
    6/6/2017

    MtronPTI's PA4020X series of high-power solid state amplifier modules operates in the 2.5 to 4.8 GHz frequency range. The amplifier highlights a Class AB linear LDMOS-GaN design, an instantaneous wide bandwidth, and a rugged, high-reliability form factor that is suitable for all modulation standards.

  8. "S" Series Solid-State Amplifiers
    8/4/2009

    These new amplifier models employ a new design that delivers more than twice the power of older models. The new, more efficient design consumes less power, and incorporates both USB and Ethernet interfaces in addition to the standard IEEE and RS-232 interfaces.

  9. Hybrid Power Amplifier Modules: 0.7-6 GHz BW
    1/30/2014

    AR has recently developed a line of hybrid power modules, or HPMs, to cover the 0.7 to 6 GHz frequency range. There are five different models available in this line with variations in output power, minimum gain, mismatch tolerance, harmonic distortion, and more. For more information on each individual amplifier module’s specifications, download the available datasheets below.

  10. S-Band GaN Solid State Power Amplifier (SSPA): VSS3617
    2/5/2016

    CPI’s Beverly Microwave Division presents VSS3617 GaN solid state power amplifiers (SSPAs) operating in the S-band (2.7 – 2.9 GHz). These high efficiency, high power, compact amplifiers are easy to maintain, and are designed for use as air traffic control radar transmitters.