Services and Products

  1. SSPA’s for Radar

    Empower RF Systems offers a wide range of power amplifiers and stand-alone or high-power amplifiers for an extensive range of radar applications, including HR for over-the horizon (OTH), VHF for very long range and ground penetration, and UHF for very long range and foliage penetration.

  2. 20-1000 MHz Solid State Broadband Power Amplifier: BBM2E4AKO (SKU 1193)

    This solid state broadband power amplifier operates in the 20-1000 MHz frequency range and delivers 100W output power. It’s ideal to use as a broadband power amplifier building block in electronic attack, digital communications, and test and measurement applications in the UHF/VHF frequency bands

  3. L-Band GaN Solid State Power Amplifier (SSPA): VSL3606

    CPI’s Beverly Microwave Division presents VSL3606 GaN solid state power amplifiers (SSPAs) operating in the L-band (1.2 – 1.4 GHz). These high efficiency, high power, compact amplifiers are highly efficient, easy to maintain, and are designed for use in long range search applications.

  4. 10000 Watt CW, 80 - 1000 MHz Solid-State Amplifier: Model 10000W1000A

    The 10000W1000A self-contained, air-cooled, broadband, solid-state amplifier is ideal for applications where instantaneous bandwidth and high gain are required. When used with an RF sweep generator, this amplifier will nominally provide over 10000 watts of power. The device also utilizes push-pull circuitry in the interest of lowering distortion and improving stability.

  5. Amplifier Module: 2110-2170MHz (50 Watts): GCM5C5DHO (SKU 3114)
    This is a compact, high power amplifier module with stop frequencies from 2110 MHz to 2170 MHz ideal for broadband mobile jamming and band specific high power linear applications. It features high reliability and ruggedness, a small form factor along with a light weight, built in control, monitoring, and protection circuits, 50 ohm input/output impedance, a solid-state class AB linear design, and more. High power advanced GaN devices are used in order to achieve good power density, high efficiency, a wide dynamic range, and low distortions.
  6. High-Performance Spatium® SSPA Technology

    Qorvo offers high-power, ultra-broadband performance, and solid state reliability when using the new Spatium® technology. This patented Spatium® RF power combining technology provides a highly reliable, efficient alternative to traveling wave tube amplifiers (TWTAs) for commercial and defense communications, radar, electronic warfare (EW), and other defense system applications.

  7. 60/40 W, 0.7 To 18 GHz Broadband Solid-State Amplifier: 60/40S1G18A

    AR offers the 60/40S1G18A broadband amplifier designed for operation in the 0.7 to 18 GHz range in applications where instantaneous bandwidth, high gain, and linearity are required. This model features low spurious signals, high linearity, and high tolerance, enabling its use in RF applications such as RF susceptibility testing, antenna/component testing, and communication technology testing. 

  8. 30 To 300 Watt, 1-6 GHz Amplifiers From AR

    AR offers 30S1G6AB, 50S1G6AB, 100S1G6AB, and 300S1G6AB models of solid-state; 30, 50, 100, and 300 Watt Class AB amplifiers that instantaneously cover the 1-6 GHz frequency band in single benchtop unit.

  9. 6 to 18 GHz MPM with Ethernet Interface: dB-4150

    dB Control offers a new  dB-4150 smart microwave power module (MPM) consisting of a solid state amplifier and a vacuum power booster. It is designed to provide 100 Watts pulsed/CW RF output power, and operate in the 6 to 18 GHz frequency range.

  10. 1.0 GHz to 4.0 GHz Dual Band Solid State Amplifiers: AS0104 Series

    This series of solid state amplifiers have been designed to cover the 1.0 GHz to 4.0 GHz frequency range in two bands (1 GHz to 2 GHz and 2 GHz to 4 GHz). Several models are available with 30W/17W, 30W/30W, 55W/17W, 55W/30W, 55W/55W, 100W/17W, 100W/55W, 100W/100W, 200W/100W, 200W/200W, 400W/100W, and 400W/200W P1dB levels. Information on specifications can be accessed on the datasheets below.