Demonstration Videos IMS-MTT 2017

81. Live From IMS2011: A Look At The NXP High-Performance RF Design Challenge's Winning Project 6/9/2011
    Brad Lindseth, a Ph.D. candidate in electrical engineering at the University of Colorado who works at the National Center for Atmospheric Research, discusses his winning design in the NXP High-Performance RF Design Challenge, "A 2-kW Amplifier for a Portable 449-MHz Space Antenna Wind Profiler Radar."
82. Live From IMS2011: Analog Devices Upgrades Tools For Modeling RF Signal Chains 6/8/2011
    Larry Hawkins, business development manager at Analog Devices (ADI), demonstrates two recently upgraded RF software tools for modeling RF signal chains incorporating ADI RFICs.
83. Live From IMS2011: New 2.7 - 3.0 GHz GaN SSPA Delivers 1.3 kW Of Power At 10% Duty 6/8/2011

    In this demo, George Solomon, senior engineer for CPI EDB’s (Communications & Power Industries) Beverly Microwave Division, introduces us to a new GaN (gallium nitride) SSPA (solid-state power amplifier) for S-band radar applications.

84. Live From IMS2011: Rogers Boosts Thermal Conductivity In New High-Frequency Laminates 6/8/2011
    Joey Kellner, product manager for Rogers Corporation, introduces us to the newest member of the company’s RT/duroid product line for high-power applications in the high-reliability and defense markets — the RT/duroid 6035HTC high-frequency laminate.
85. Live From IMS2011: NI Demos W-CDMA, LTE Measurements On New Vector Signal Analyzer 6/8/2011
    David Hall, product marketing manager for National Instruments (NI), conducts a side-by-side demonstration of NI’s new PXIe-5665 signal analyzer and Agilent Technologies’ PXA signal analyzer, comparing ACP dynamic range and measurement time on W-CDMA signals, and EVM measurements for LTE.
86. Live From IMS2011: New Wideband PLL + VCO From Hittite Achieves -110 dBc/Hz In-Band Phase Noise 6/8/2011
    Hittite Microwave applications engineer Greg Bachmanek demonstrates the company’s flagship wideband PLL + VCO product, the HMC830LP6GE, which made its debut at IMS2011.
87. Live From IMS2011: New Tool For Testing High-Power And Small-Signal RF Amplifiers 6/7/2011
    Bob Muro, application group manager/product marketing, Wireless Telecom Group, describes Boonton’s new Amplifier Test Bench software, which integrates Boonton power meters with your existing synthesizer system to enable power over frequency, gain over frequency, and VSWR measurements of active or passive devices.
88. Live From IMS2011: Gore Introduces New Rugged Assembly For High-Throughput RF Test 6/7/2011
    Paul Pino, applications engineer at W. L. Gore & Associates, shows us various RF/microwave cables, shielding and gasket materials, a self-supporting planar cable, and even a submarine cable from Gore’s product line-up.
89. Live From IMS2011: Technical Program Highlights 6/7/2011
    RF Globalnet’s Ron Grunsby and IMS2011 Technical Program Chair Ramesh Gupta discuss some of the key technologies and application areas covered in this year’s IEEE MTT-S International Microwave Symposium (IMS) technical program.
90. Live From IMS2011: A Conversation With The Symposium General Chairman 6/7/2011
    Jeffrey Pond, IMS2011 general chair, outlines some of the reasons this year’s conference is unique, explains the significance of its “Microwaves For The World” theme, and discusses the impact the global economy has had on the IEEE MTT-S International Microwave Symposium (IMS).