Demonstration Videos IMS-MTT 2017

  1. How To Simulate Throughput For A New Device Design 6/13/2018

    Many engineers want to know how to calculate the throughput for a new antenna design, especially for 5G applications. Jeff Barney from Remcom walked us through the process of simulating the antenna element, modeling the channel propagation, and calculating the throughput modulation. Check out the video for more in-depth information, as well as a specific example of measuring the throughput of WiFi in a house.

  2. Leveraging High Efficiency TWTA And MPM Designs For Radar, EW, And Communications Applications 6/12/2018

    As greater efficiency becomes more critical in ground, mobile, and airborne applications, TWT technologies must meet these new requirements. At IMS 2018, Mike Lee from dB Control  discussed with RF Globalnet SWaP advantages in radar, EW, and communications systems, as well as leveraging high efficiency innovations in TWTA and MPM designs.  

  3. Securing Incremental Design And Root Cause Analysis 6/16/2017

    Michel Durr with Leti discusses some of the challenges involved in managing RF and mmWave technology design iteration, as well as some methodologies to address ongoing revisions in the technology.

  4. Why You Can't Always Trust Claims Of Unconditional Stability In Amplifiers 6/7/2017

    Alan Ake with Guerrilla RF explains why engineers should be skeptical when a linear driver or LNA’s datasheet claims to feature unconditional stability.

  5. When Does GaN Make Sense For Linear FEMs? 6/7/2017

    At IMS 2017, Bror Peterson with Qorvo spoke with us about some of the trades that led his company to use GaN for linear FEMs for 5G phased array.

  6. How Do You Pick An Amplifier? 5/26/2016

    Steve Walley with dB Control took a few minutes out of the last day of IMS 2016 to answer this very question. Watch the video to hear what he had to say.

  7. Product Video: New Doherty Amplifiers From Qorvo 5/26/2016

    At IMS 2016, senior RF applications engineer Tammy Ho with Qorvo showed us three new Doherty amplifiers and discussed how they’re being used in trials for 5G rollout in 2020.

  8. Beyond The Spec Table: Assessing Amplifier Linearity 5/25/2016

    Choosing the right amplifier for your application isn’t as simple as looking over a datasheet. After a few decades worth of experience in RF design and applications engineering, Alan Ake with Guerilla RF has learned the intricacies of selecting the right amplifier, and now he’s sharing that information with you.

  9. Broadening Their RF Portfolio 5/21/2015

    Tim Brauner with Dielectric Labs gave us an up-close view of what his company had on display at IMS in 2015. Check out the video to hear about lowpass filters, power dividers, a brand new line of directional couplers, and an SMT 6dB resistive divider.

  10. Two New High-Linearity Gain Blocks 5/21/2015

    Alan Ake with Guerrilla RF spent a few minutes in the press room at IMS 2015 to tell us about two new broadband, high-linearity gain blocks.