Products and Services

  1. Gator Class A Stimulus Transmitter
    1/25/2007
    Each Gator™ Transmitter is housed in a high impact ABS water-resistant case. It has a built-in agile frequency synthesizer, dynamically controlled power amplifier and a built-in modem and DTMF (touch-tone) decoding allowing remote control of all transmitter parameters via a phone line or cellular telephone
  2. R&S ESU EMI Test Receiver
    6/28/2006

    The R&S ESU from Rohde & Schwarz is a new family of CISPR16-1-1-compliant EMI test receivers that meet all civil and military standards for electromagnetic interference measurements. New FFT-based test methods speed up the measurement. With the time-domain scan, users can perform overview measurements up to 100 faster than on previous EMI test receivers. The instrument also features comprehensive test functions such as a complete set of parallel detectors including the new CISPR-RMS detector, RF scan, IF analysis and numerous report functions. The R&S ESU is available in three models with the frequency ranges 20 Hz to 8 GHz, 26.5 GHz and 40 GHz.

  3. R&S® ESW EMI Test Receiver
    6/29/2016

    The R&S® ESW is an EMI test receiver featuring the widest dynamic range with a high 1 dB compression point and high sensitivity due to its low inherent noise. Designed to combine the functions of a full-featured analyzer and an EMI test receiver in one instrument, this device is capable of operation in the 2 Hz to 8 GHz, 2 Hz to 26.5 GHz, and 2 Hz to 44 GHz frequency ranges, and is ideal for demanding EMI certification measurements required in automotive and A&D markets.

  4. R&S ESL EMI Test Receiver
    8/20/2008

    The R&S®ESL EMI test receiver combines two instruments in one, measuring EMC disturbances in accordance with the latest standards and also serving as a full-featured spectrum analyzer for diverse lab applications. The R&S®ESL is the ideal instrument for small budgets.

  5. Transmit/Receive Module for Phased Array Radar
    6/25/2013

    This rugged and liquid cooled transmit/receive module features high reliability, integral digital control and messaging, an integral power supply, low receiver noise figure, an integrated solid-state high-peak power pulsed amplifier, GaN-based power pallets, and more. It’s been designed to operate in an active phased array radar system and operates in the 2.9-3.3 GHz frequency range.

  6. Digital Frequency Discriminators/Instantaneous Frequency Measurement Receivers
    1/10/2013

    These Digital Frequency Discriminators (DFDs) and Instantaneous Frequency Measurement Receivers (IFMs) are ideal for electronic countermeasures, signal intelligence, radar warning receivers, the capture of signal RF pulse events, and identification of frequency agile radar.

  7. 0.5 – 18 GHz High Performance Receiver: QR026
    5/3/2016

    Teledyne’s QR026 is a high performance receiver designed to offer wide and synthesized capabilities from 500 MHz to 18 GHz, and frequency extensions up to 40 GHz. Its modular architecture allows it to be configured as a single, dual, triple, or quad channel unit, which can be used in many applications including electronic intelligence, electronic support measures, defensive aids suites, and combined ELINT/ESM sensors within ground, airborne, and naval environments.

  8. Parallel Fiber Optics Transmitter/Receiver: MiniPOD™
    6/28/2012

    The MiniPOD™ line consists of a Twelve-Channel, Pluggable, Parallel- Fiber-Optics Transmitter, and a Twelve-Channel, Pluggable, Parallel-Fiber-Optics Receiver. These high performance fiber optics modules are ideal for short-range parallel multi-lane data communication and interconnect applications. The two different modules allow systems designers to different package options to optimize their cable management and board layout.

  9. Keyfob Transmitters
    7/5/2006
    The Linx CMD-KEY#-*** Remote Command Keyfob is ideal for general-purpose remote control and command applications. The unit has been pre-certified for FCC Part 15 compliance, which reduces costs and time to product introduction. Available in 315, 418 (standard), or 433.92MHz...
  10. Monitoring Receiver: R&S EB500
    3/18/2011

    The R&S EB500 monitoring receiver is designed to meet the demanding requirements of ITU-compliant radio monitoring tasks in stationary and mobile environments. The receiver is the ideal choice for these tasks because it is capable of operation via the front panel or remote-control software, performs high speed signal searches in the spectrum, and gathers information by means of wideband demodulation. In addition, the R&S EB500 can be used for a variety of other applications.