Products and Services
-
Weather Radar Product Solutions
6/14/2016
Radar systems are critical for assisting meteorologists in weather forecasting by detecting changes in local weather patterns and bringing attention to distant weather patterns. CPI has the experience and range of products available to support new and existing weather radar systems.
-
Lizard Portable Stimulus Transmitter
1/25/2007
The Lizard™ is a portable, battery-powered 1 watt CW (Continuous Wave) stimulus transmitter used for indoor coverage testing. The Lizard™ is ideal for WLAN set-up and evaluating network performance
-
Power Signal Transmitters
6/29/1999
Touch screen power signal transmitters for GSM 900 and DCS 1800 combine a signal generator and a 20 W power amplifier into one single lightweight unit
-
Portable TV Test Receiver: R&S EFL240/R&S EFL340
10/3/2011
The R&S®EFL240/R&S®EFL340 is a compact, portable TV test receiver for satellite, cable and terrestrial television. Its versatile measurement functions and its operating convenience are ideal for the installation of cable TV systems, satellite receiver systems, in-building distribution systems and antennas. Its favorable price makes the test receiver extremely attractive for these applications.
-
Keyfob Transmitters
7/5/2006
The Linx CMD-KEY#-*** Remote Command Keyfob is ideal for general-purpose remote control and command applications. The unit has been pre-certified for FCC Part 15 compliance, which reduces costs and time to product introduction. Available in 315, 418 (standard), or 433.92MHz...
-
Gator Class A Stimulus Transmitter
1/25/2007
Each Gator™ Transmitter is housed in a high impact ABS water-resistant case. It has a built-in agile frequency synthesizer, dynamically controlled power amplifier and a built-in modem and DTMF (touch-tone) decoding allowing remote control of all transmitter parameters via a phone line or cellular telephone
-
Tortoise Multi-Band Stimulus Transmitter
1/4/2008
Tortoise™ is a lightweight, (under 20 lbs) DC powered transmitter system composed of dual independent, transmitter modules giving the user freedom to transmit on any 2 frequency bands from anywhere without expensive and bulky additonal transmitters. Each Tortoise™ is housed in a high impact ABS water resistant case. Each transmitter module has a built-in agile frequency synthesizer, dynamically controlled power amplifier and remote control of all transmitter parameters via an IR remote controller. Remote adjustments include power level, channel or frequency assignment and transmit On/Off.
-
EMI Test Receiver R&S ESR
8/9/2012
The R&S®ESR EMI test receiver functions both as a powerful signal and spectrum analyzer for lab applications, and as a tool to measure conducted and radiated disturbances in the 10 Hz to 26 GHz frequency range in compliance with the CISPR 16-1-1 standard. Electromagnetic disturbances are measured at a very high speed with the help of an FFT-based time domain scan.
-
R&S® ESW EMI Test Receiver
6/29/2016
The R&S® ESW is an EMI test receiver featuring the widest dynamic range with a high 1 dB compression point and high sensitivity due to its low inherent noise. Designed to combine the functions of a full-featured analyzer and an EMI test receiver in one instrument, this device is capable of operation in the 2 Hz to 8 GHz, 2 Hz to 26.5 GHz, and 2 Hz to 44 GHz frequency ranges, and is ideal for demanding EMI certification measurements required in automotive and A&D markets.
-
Transmit/Receive Module For Monopulse Radar
6/25/2013
The AS-TRM-Ku-10W is a compact and lightweight transmit/receive module that features high reliability, a rugged design, power and temperature monitoring, 50 Ohm input/output impedance, bias sequencing, fast TX/RX switching, and more. Each transmit chain and receive chains consist of a high-Q cavity bandpass filter, an LNA, and a limiter. This transmit/receive module is well suited for monopulse radar applications. For specifications and a mechanical outline, download the datasheet.