Products and Services

  1. SO-8 Hermetic Package DC-20GHz 6/18/2014

    This hermetic SO-8 package from MSI is designed for Hi-Rel, microwave radio, military & space applications requiring enhanced reliability performance. The package is fully hermetic and operates from DC to 20 GHz. The package body and outline dimensions are compatible with JEDEC Standards MS-012-AA. The package meets MIL-PRF-38534, Appendix C, Table C-VI requirements.

  2. GaAs MMIC mmWave Differential IF IQ Mixer: MMIQ-30120H 8/23/2023

    The MMIQ-30120H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 30 to 120 GHz on the RF and LO ports with an IF from DC to 30 GHz.

  3. 802.11 a/b/g/n (2.4 And 4.9 To 5.9 GHz) Front End Module - AFEM-9601 6/26/2008
    The AFEM-9601 dual band Front End Module is designed for WLAN applications in both the 2.4 GHz and 4.9 to 5.9 GHz frequency ranges. The FEM is optimized for IEEE 802.11a/b/g/n WLAN applications with dual linear power amplifiers, dual low noise amplifiers, dual Tx/Rx switches, diplexer, Tx and Rx filtering, and direct CMOS compatible control and detect functions.
  4. Cavity Bandpass Filter (B9998) 2/17/2009
    Our Cavity Bandpass filter P/N: B9998 is a wideband filter with Center frequency at 1845 MHz, Insertion loss in the passband of < 0.75dB, 0.5dB Bandwidth of 300 MHz and rejection of > 70dB at 1625 MHz and 2065 MHz. This filter covers the entire DCS and PCS Band and is capable of handling 30W power.
  5. Microwave USB Power Sensor (PSN50) 1/20/2015

    As an overview, the PSN50 sensor provides true RMS measurements from -30 dBm to +20 dBm over the frequency range 50 MHz to 6 GHz enabling users to make highly accurate power measurements for both CW and digitally modulated signals such as GSM/EDGE, CDMA/EV-DO,WCDMA/HSDPA, WiMAX, and TD-SCDMA. Accurate power measurements in the field are important for verifying that transmitter outputs are operating at specified levels. For example, service technicians need to verify base station output power because lower output power can quickly translate into large coverage differences that can cause dropped calls.

  6. 20-1000 MHz Solid State Broadband Power Amplifier: BBM2E4AKO (SKU 1193) 5/31/2012

    This solid state broadband power amplifier operates in the 20-1000 MHz frequency range and delivers 100W output power. It’s ideal to use as a broadband power amplifier building block in electronic attack, digital communications, and test and measurement applications in the UHF/VHF frequency bands

  7. 3.3 To 5V Linear Wireless Data Power Amplifier For 3.3 To 3.8 GHz Operation - ALM-42316 6/27/2008
    Avago Technologies’ ALM-42316 is a fully-matched Power amplifier module for use in the (3.3-3.8)GHz band. High linear output power at 3.3V is achieved through the use of Avago Technologies’ proprietary 0.25um GaAs Enhancement-mode pHEMT process.
  8. 10-dB Directional Coupler 225 MHz To 1 GHz: Model 3000-10 9/30/2010
    This coaxial directional coupler delivers 10 dB of coupling from 225 MHz to 10 GHz, has flat frequency response characteristics, high directivity, and is ruggedized for both commercial and military applications.
  9. MMA-495933-Q5 -- 4.9 To 5.0 GHz Linear Power Amplifier 5/29/2007
    The MMA-495933-Q5 is a 2.0 watt amplifier pre-matched to 50 ohm operating over frequency range 4.9 GHz to 5.9 GHz. The RF gain is 10.5 dB. The typical output IP3 is 46 dBm and P1dB is 33 dBm. The MMA-495933-Q5 amplifier has excellent performance for 802.11 WLAN and 802.16 WiMax applications
  10. 2 to 7 Channel Switched Filter Banks 4/15/2014

    In addition to their standard line of switched filter banks, API technologies recently unveiled a new line with customer-specified frequency coverage from 2 to 7 channels. They cover the 20 MHz to 7500 MHz frequency range with ultimate rejection up to 20 GHz. Low insertion loss and high isolation are achieved through mechanically channelized PIN diode switch manifolds, and lumped element filters have been integrated for increased rejection.