Products and Services
-
SSISOV100V20M18G System
4/21/2021
The SSISOV100V20M18G System is designed to generate up to 100 V/m CW at a 2m test distance for ISO 11451-2 full-vehicle testing from 20MHz-18GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
-
Digital Radio Coprocessor: Si4694
12/10/2021
The Si4694 DRM30 digital radio coprocessor provides significant advances in size, power consumption, and performance to enable DRM30 Radio reception in automotive infotainment systems and car radios. It is designed to work with the high-performance automotive Si479xx family of radio tuners.
-
Die On Carrier, Silicon Digital Attenuator: ADRF5474
6/17/2022
The ADRF5474 is a 4-bit digital attenuator with 22 dB attenuation control range in 2 dB steps manufactured in a silicon process attached on a gallium arsenide (GaAs) carrier substrate. The substrate incorporates the bond pads for chip and wire assembly, and the bottom of the device is metalized and connected to ground.
-
FCC-2 Tuned Dipole Antenna - 65 MHz - 180 MHz
11/22/2008
The FCC-2 is a tuned dipole antenna operating within the 65 MHz - 180 MHz frequency range.
-
6 - 20 GHz Low Noise Amplifier: ADM-8556
7/25/2023
The ADM-8556 is a wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz.
-
50 Ohm Coaxial Terminations
2/28/2022
These extremely rugged 50 Ohm mechanical coaxial terminations are useful when terminating unused ports, on isolated ports of hybrids and combiners, and to protect devices from signal reflections.
-
Quick Disconnect Connector
5/23/2001
The ultra high density compact N UHD Series of rectangular connectors feature 90 to 540 contacts
-
Miniature Surface Mount Bias-Tee: BTM-0026PSM
3/15/2023
The BTM-0026PSM is a packaged miniature bias tee featuring excellent insertion loss and superior isolations over a broad 10MHz to 26GHz bandwidth.
-
Directional Coupler: 501065013
9/23/2022
Krytar coaxial Dual-Directional Couplers are 4-port couplers that are the combination of two 3-port couplers having their main lines cascaded. This design lets you monitor forward and reflected power.
-
Directional Couplers
9/28/2006
Corry Micronics offers four types of 50 ohm directional couplers with several different styles and connector options. All Corry Micronics directional couplers feature a flat frequency response and great port-to-port isolation while maintaining low insertion losses