Products and Services

  1. Integrated Drive Triple Balanced Mixer: MM2A-0530HPSM 5/23/2024

    The MM2A-0530HPSM is a broadband triple balanced mixer with an integrated broadband LO driver amplifier, ideal for applications with wide and overlapping bandwidths and operation through the K band.

  2. Passive MMIC 11GHz Diplexer/Reflectionless Filter: MDPX-00006PSM 12/23/2024

    The MDPX-00006PSM is a versatile MMIC surface-mount diplexer designed to multiplex signals across two distinct frequency ranges: low-frequency DC to 10 GHz and high-frequency 12 to 28 GHz.

  3. 0.66 – 0.72 GHz High Linearity Power Amplifier: GRF5506 11/24/2020

    The GRF5506 from Guerrilla RF is a high gain, two-stage InGaP HBT power amplifier ideally designed for use in transmitter applications that typically do not employ digital predistortion correction schemes. The device delivers excellent P1dB, ACLR, and IM3 performance over the 660 to 720 MHz frequency range.

  4. Enhanced 250Vac & 305Vac Capacitors 6/22/2021

    Knowles' latest enhanced range of Safety Certified capacitors complies with international UL/cUL and IEC/EN specifications to offer designers the option of using a surface mount ceramic multilayer capacitor to replace leaded film types.
     

  5. 80 - 6000 MHz, 150W Min Solid State High Power Amplifier: AMP2055DB-600-150LC 7/12/2023

    The AMP2055DB-600-150LC solid state high power amplifier operates over a frequency range of 80 to 6,000 MHz for a wide range of demanding applications such as broadband EMI/RFI, Lab, GTEM, and IEC Testing.

  6. Deployable EW System With Rappid: MSP1202 4/13/2022

    The MPS1202 is a ruggedized microwave and digital processing subsystem designed to operate in the most demanding environments. Mercury’s MPS1202 offers a tactical solution for system development and sustainment in a small rugged form factor.

  7. 2810 Vector Signal Analyzer 5/12/2006
    The Model 2810 Vector Signal Analyzer (VSA) from Keithley Instruments allows manufacturers of mobile phones, mobile radios, cordless phones, wireless sensors, and other industrial/medical telemetry products to reduce their test times, capital equipment costs, and test system development time significantly over current technology...
  8. Holzworth Ultra Low Jitter Amplifier: HX2410 4/28/2011

    The HX2410 CW to CMOS Conversion Amplifier is intended for use as a peripheral component in precision oscilloscope test applications. The HX2410 eliminates trigger induced jitter that is caused by the low slew rate of low frequency sinusoidal (CW) trigger signals, ultimately resulting in inaccurate oscilloscope measurements. The proprietary architecture maintains the integrity of an ultra low phase noise sinusoidal (CW) signal while converting it to a CMOS Logic level exhibiting the absolute lowest jitter available.

  9. Full Wave Matching Circuit Optimization In XFdtd 5/4/2015

    Determining the final set of component values in a matching network can be a challenging process. Traditionally, RF engineers have had to simplify and idealize their matching circuits in schematics that are separated from the EM simulation. This simplification into a lumped element schematic requires perfect grounds and leaves out the coupling and transmission line effects of the interconnect metal and the antennas.

  10. SAS-521-7 Bilogical Antenna 11/22/2008

    The SAS-521-7 is a bilogical antenna designed to provide and inexpensive solution to wideband applications ranging from 25 MHz to 7 GHz in environments from shielded enclosures to the outdoors. Suitable for FCC, MIL-STD, VDE, TEMPEST and immunity testing, the SAS-521-7 provides consistent and reliable measurements. The antenna also eliminates the need for antenna switching and therefore makes this unique hybrid a versatile performer.