Products and Services

31. DC-30 GHz 6-Bit Digital Attenuator: CMD325 3/18/2020

    The CMD325 from Custom MMIC is a negative controlled, wideband GaAs MMIC 6-bit digital attenuator die designed to operate from the DC to 30 GHz frequency range. Each bit of the attenuator is controlled by a single voltage of either 0 V or –5 V. It features a low insertion loss of 4 dB at 12 GHz and the attenuation accuracy is typically 0.2 dB step error.

32. Ultra-Wideband Development Kit: QM33120WDK2 7/25/2025

    The Qorvo QM33120WDK2 Ultra-Wideband Development Kit is an all-in-one solution for developers and engineers working on UWB (Ultra-Wideband) product development and demonstrations.

33. M626x Series TCXO/VCTCXO 5/9/2022

    MtronPTI's M626x series of products uses a high-Q crystal with a newer generation of integrated circuit (IC) resulting in an excellent phase noise of -156dBc/Hz at 10kHz offset and tight stability down to +/-0.1ppm over - 40°C to +85°C. 

34. 18 - 40 GHz Wideband GaN SSPA: QPB2040N 6/22/2023

    An excellent alternative to traveling wave tube amplifiers, Qorvo’s Spatium™ QPB2040N is a solid state, spatialcombining amplifier with an operating range of 18–40 GHz.

35. Ka Band UpConverter With Synth (27 to 31 GHz): ADMV4530 4/12/2021

    The ADMV4530 is a highly integrated upconverter with an inphase/quadrature (I/Q) mixer that is ideally suited for next generation Ka band satellite communications. The ADMV4530 upconverter comes in a RoHs compliant, 6 mm × 6 mm, 40-terminal land grid array (LGA) package and operates over the −40°C to +85°C case temperature range.

36. Silicon Dioxide Coaxial Cable Assemblies 7/25/2022

    Times Microwave Systems SiO2 cable assemblies are a major advancement in Silicon Dioxide coaxial cable technology. Improvements have been made in the areas of cable design, cable manufacturing technology, glass seal technology, and the range of connector types available.

37. Isolated Smart Switch: Si834x 5/10/2023

    Si834x devices provide up to four isolated high- or low-side switches with low "ON" state switch resistance. Si834x switches are ideal for driving resistive and inductive loads including solenoids, relays, and lamps commonly found in industrial control systems.

38. dB-3205 Microwave Power Module 6/1/2020

    The dB-3205 Q-Band Microwave Power Module (MPM) is designed for advanced extremely high frequency (AEHF) communication and rugged military environments. It operates in the 43.5 to 45.5 GHz frequency range and provides 80 Watts CW RF output power.

39. Wideband 7.5-18 GHz, 300 W TWT Amplifier With Gain Linearization 2/23/2012

    The dB-4410 TWTA (Traveling Wave Tube Amplifier) uses gain linearization to amplify complex waveforms with multiple pulse patterns and bursts, modulation schemes, and counter-jamming capabilities. This makes it ideal for use in radar, ECM, and communication systems. This amplifier features a modular construction, High-Reliability, a wide bandwidth, a very low phase noise, MIL-STD-461E and MIL-STD 704 compliance, and qualification for military airborne environments.

40. DC – 4 GHz GaN RF Transistors: QPD1009 And QPD1010 4/28/2016

    The QPD1009 and QPD1010 are discrete GaN on SiC HEMTs operating from the DC to 4 GHz frequency range. The QPD1009 is a 15W, 50V device with an output power level of 17W at 2 GHz, and a linear gain of 24 dB at 2 GHz. The 10W, 50V QPD1010 features an output power of 11W at 2 GHz and a linear gain of 24.7 dB at 2 GHz. These two devices are housed in low thermal resistance 3 x 3 mm packages, and are ideal for wideband or narrowband amplifiers, jammers, and for military radar, civilian radar, land mobile, military radio, and test instrumentation applications.