Services and Products

  1. 800 MHz to 2.7 GHz Solid State Amplifiers: AS0827 Series

    This series of solid state amplifiers contains five different models with 15W, 30W, 55W, 110W, and 230W P1dB levels. These amplifiers operate in the 800 MHz to 2.7 GHz frequency range and are ideal for communications, military/defense, high energy physics, EMC testing, and R&D applications. Specifications on the individual models can be found on the datasheets below.

  2. L-Band GaN Solid State Power Amplifier (SSPA): VSL3606

    CPI’s Beverly Microwave Division presents VSL3606 GaN solid state power amplifiers (SSPAs) operating in the L-band (1.2 – 1.4 GHz). These high efficiency, high power, compact amplifiers are highly efficient, easy to maintain, and are designed for use in long range search applications.

  3. 200 Watt, 2.45 GHz Solid-State LDMOS Power Amplifier Module

    Manufactured by Ar Modular RF, model KMS2250 is a 2.45 GHz Solid-State LDMOS power amplifier module built for the ISM market. This 53dBm linear power amplifier has built-in output power control adjustable externally from 10 to 200 Watts. It also incorporates built-in gating/RF blanking and an RF monitoring port

  4. Microwave Solid State RF Power Amplifier: Model 8100-052

    ETS-Lindgren offers the Model 8100-052 microwave solid state power amplifier (PA) specifically designed for EMC applications that include IEC 61000-4-3, 30 V/m automotive requirements. This 500 W PA utilizes GaAs technology, and delivers an improved design and higher efficiency performance over silicon-based amplifiers.

  5. Class AB Solid-State RF Power Amplifier

    AR Modular RF has introduced a new Class AB solid-state power amplifier that delivers in excess of 250 Watts CW power into a 50-Ohm load over the frequency range of 1750 MHz to 1850 MHz.

  6. 20-1000 MHz Solid State Broadband Power Amplifier: BBM2E4AKO (SKU 1193)

    This solid state broadband power amplifier operates in the 20-1000 MHz frequency range and delivers 100W output power. It’s ideal to use as a broadband power amplifier building block in electronic attack, digital communications, and test and measurement applications in the UHF/VHF frequency bands

  7. Radiated Immunity Testing and TWT Replacements: 3000S1G2z5 Amplifier

    AR’s 3000S1G2z5 is a solid state amplifier covering the 1 to 2.5 GHz frequency range while providing 3000 watts of output power. It’s ideal for radiated immunity testing and other applications that require instantaneous bandwidth, high gain, and linearity. It’s also an ideal TWT replacement.

  8. 350 Watt CW 0.7-6.0 GHz Solid-State Amplifier: 350S1G6

    AR’s 350S1G6 is a solid-state broadband amplifier covering the 0.7 to 6.0 GHz frequency range. When used with a sweep generator, this Class A, self-contained, air-cooled amplifier provides a minimum of 350 watts RF power. The low level of spurious signals and linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems.

  9. X-Band Solid-State Power Amplifier: SSPA 8.5-9.6-30-28V
    Aethercomm Part Number SSPA 8.5-9.6-30-28V is a high power, X Band, Solid State Power Amplifier that operates from 8.5 to 9.6 GHz. The saturated output power is 30 watts typical at 25ºC. Typical small signal gain is 50 dB. Noise Figure is 10 dB typical at 25ºC. Input VSWR is 2.0:1 maximum. Output VSWR is 2.0:1 maximum. This unit is equipped with Aethercomm's proprietary DC switching circuitry that enables and disables the DC-DC circuitry in 1000 nSec maximum.
  10. High Efficiency Pulsed Microwave Power Module: dB-3756HE And dB-3758HE

    The dB-3756HE and dB-3758HE high-efficiency pulsed microwave power modules (MPM) operates in the 9 to 10 GHz frequency range and provides 1 kW peak power at 20% maximum duty cycle.