Services and Products

  1. 80 – 1000 MHz Solid-State Amplifier: 150W1000B
    5/25/2018

    This 150W1000B is a self-contained solid-state amplifier covering the 80 MHz to 1000 MHz frequency range and features lowered distortion and improved stability through the use of push-pull circuitry. When used in conjunction with an RF sweep generator, this amplifier can provide 150 watts of RF power.

  2. 1 To 18 GHz Microwave Power Amplifiers
    11/6/2018

    AR offers world class solid state power amplifiers designed for various EW, EMC and communication’s applications. You can have chip & wire hybrid modules from 0.7 - 6GHz to 100 watts or benchtops designs up to 500 watts CW. Benchtop units from 6-18 GHz are also available in 20 and 40 watts CW Class A models. For added versatility, AR can also supply dual band single housed units covering the full 1-18 GHz band with a high power of 60 watts up to 6 GHz and 40 watts from 6 – 18 GHz.

  3. 0.8 GHz to 4.0 GHz Dual Band Solid State Amplifiers: AS0840 Series
    8/31/2012

    The AS0840 Series of solid state amplifiers covers the 0.8 GHz to 4.0 GHz range in two bands: 0.8 GHz to 2 GHz, and 2 GHz to 4 GHz). Nine models are available with P1dB levels of 30W/17W, 30W/30W, 55W/30W, 55W/55W, 100W/55W, 100W/100W, 200W/100W, 200W/200W, and 400W/200W. Like all MILMEGA amplifiers, this series is ideal for military/defense, communications, high energy physics, R&D, and EMC testing applications. Specifications can be found on the datasheets below.

  4. 1000 Watts CW 0.8 – 4.2 GHz Solid-State Amplifier: 1000S1G4
    6/26/2017

    AR’s 1000S1G4 is a solid-sate amplifier covering the 0.8 – 4.2 GHz frequency range. When used with a sweep generator, it provides a minimum of 1000 watts RF power. Like most of AR’s amplifiers, this model is ideal for applications that call for instantaneous bandwidth, high linearity, and high gain.

  5. "S" Series Solid-State Amplifiers
    8/4/2009

    These new amplifier models employ a new design that delivers more than twice the power of older models. The new, more efficient design consumes less power, and incorporates both USB and Ethernet interfaces in addition to the standard IEEE and RS-232 interfaces.

  6. 2-6 GHz Solid State Power Amplifier: PTS6900
    2/8/2016

    The new PTS6900 Solid State Power Amplifier (SSPA) from TMD is a low band CW amplifier operating within the 2 to 6 GHz frequency range, with nominal output power of 150 W, and 55 dB of gain. Utilizing the latest advances in 0.25 µm GaN MMIC technology and low loss power combiners, this amplifier is ideally used for EW/ECM applications.