Products and Services

  1. 17-27 GHz Low Noise Amplifier: CMD163
    2/3/2016

    Custom MMIC introduces the CMD163 as a high dynamic range GaAs low noise amplifier (LNA) designed for military, space, and communications systems where small size and high linearity are required. This device delivers greater than 24 dB of gain with a corresponding output 1 dB compression point of +19 dBm, and a noise figure of 1.3 dB. It is optimized for 21 GHz operation.

  2. Low-Noise Amplifier Modules For Cellular Infrastructure Applications: ALM-11x36
    3/30/2011
    The new ALM-11x36 Low-Noise Amplifier Modules for Cellular Infrastructure Applications deliver best-in-class noise performance and high linearity with a compact package. The modules can replace large discrete and surface-mount component counts in conventional designs, shortening design cycle time and providing board space savings.
  3. 2-18 GHz Low Noise Amplifier
    1/29/2013

    This low noise amplifier (LNA) features internal voltage regulation, unconditional stability, and an integrated bias-tee on the output port. It covers the 2-18 GHz frequency range and provides 30dB of gain while maintaining +2.0dB maximum gain flatness over the operating frequency. The amplifier requires +12 to +15VDC, and its current draw is less than 350mA.

  4. Ka Band Low Noise Amplifier: AML1820L3611
    3/20/2012
    The AML1820L3611 from Microsemi is a low noise amplifier (LNA) that operates in the Ka Band.
  5. High Linearity Wideband LNA in a Miniature Form Factor: µHILNA™: 50 to 1500 MHz, 20 dB Gain
    5/2/2012

    NuWaves’ µHILNA™ is a high linearity, wideband LNA (low noise amplifier) with a form factor of 1.00″ x 0.75″ x 0.50”. In addition to its miniature size, the LNA features reverse voltage protection, a ruggedized, fully characterized assembly, application diverstity, high intercept, a wide dynamic range and wide operational voltage range, multi-octave frequency coverage, reverse voltage protection, low cost, and much more.

  6. W-Band Low Noise Amplifier: CHA1008-99F
    6/8/2012

    This low noise amplifier (LNA) operates in the 80-105 GHz frequency range and features 16 dB linear gain, a 5 dB noise figure from 80 to 90 GHz, a 3.40x1.60x0.07mm chip size, and VD=2.5V @ ID=115 mA DC bias.

  7. High-Power Switch LNA Module: QPB9325
    11/20/2017

    Qorvo offers the QPB9325 highly integrated front-end module with operation in the 3.6 – 3.8 GHz frequency range ideally suited for TDD base station, wireless infrastructure, and macro or picocell base station applications. This LNA module integrates RF functional blocks such as a pin-diode based high power switch along with two LNA stages.

  8. High Gain GPS Low Noise Amplifier With Integrated Pre & Post FBAR Filters: ALM-1812
    12/2/2009
    The Avago ALM-1812 is a GPS front-end module that combines a low noise amplifier (LNA) with GPS FBAR Filters.
  9. 3-Channel Low Noise Amplifier
    8/14/2017

    Corry Micronics offers the CMILNA-847-1747-S broadband low noise amplifier (LNA) with three independently amplified channels in a common housing. Features include an ultra-low noise figure of 2 dB and greater than 18 dB of gain, making this LNA ideal for a number of applications, such as cellular base stations, software defined and field communication radios, FM and AM receivers, switch matrices, lab use, WiFi, surveillance sub-systems, satellite systems, and other pre-amplification applications.

  10. 1-6 GHz Positive Gain Slope Low Noise Amplifier In WaferCap SMT Package: VMMK-3603
    12/5/2011

    This low noise amplifier is ideal for 3.1-10.6 GHz UWB LNA, 3.5 and 5-6 GHz WLAN and WiMax, 10.5 GHz PMP, 802.16/802.20 BWA systems, radar systems, ECM systems, and generic IF amplifier applications.