Products and Services

  1. High Linearity/High Gain Low-Noise Amplifier
    6/28/2013

    This GaAs pHEMT and HBT two-stage low-noise amplifier (LNA) features wideband performance (useable to 1.1 GHz), +5 V operation, and high gain (38 dB@ 849 MHz). It’s ideal for use in ultra low-noise, high gain, and high linearity systems as well as GSM, CDMA, WCDMA, and cellular infrastructure systems.

  2. High-Power Switch LNA Module: QPB9325
    11/20/2017

    Qorvo offers the QPB9325 highly integrated front-end module with operation in the 3.6 – 3.8 GHz frequency range ideally suited for TDD base station, wireless infrastructure, and macro or picocell base station applications. This LNA module integrates RF functional blocks such as a pin-diode based high power switch along with two LNA stages.

  3. LNA For Tower Mounted Amplifiers, Remote Radio Units, Repeaters And Base Stations: SKY67001-396LF
    11/3/2011

    Skyworks Solutions has introduced a new single stage GaAs pHEMT LNA that offers low noise figure (0.60 dB), very high linearity (23 dBm IIP3), and excellent return loss (14 dB) in a small 2 x 2 mm DFN package. On-die active bias design ensures consistent performance and enables unconditional stability. The 0.6 – 1.2 GHz SKY67001-396LF is designed for cellular infrastructure applications including tower mounted amplifiers, remote radio units, repeaters and base stations. The LNA is ideal for cost sensitive, yet demanding situations which require a highly efficient amplifier with high gain and low-noise figure.

  4. SPF-5344Z - Low-Noise, High-Linearity, High-Gain Amplifier
    1/6/2009
    The SPF-5344Z is a high performance, two-stage pHEMT MMIC LNA that offers low noise figure and high linearity in a gain block configuration. Its single-supply operation and integrated matching networks make implementation remarkably simple. The off-chip interstage choke and DC block allow for optimum performance tuning.
  5. Variable Gain High Linearity, Low Noise Amplifier: RFLA1018
    9/9/2011
    RFMD's RFLA1018 is an analog-controlled voltage-variable gain amplifier featuring high linearity and very low noise figure. This LNA with bypass mode and variable attenuator provides over 35dB of dynamic gain range. The RFLA1018 has a 3.3V control range with maximum gain at 0V. The LNA is temperature compensated to reduce gain variation. A noise figure of 0.65dB and an IIP3 of 2dBm make this component ideal for receiver input lineups. The RFLA1018 is packaged in a small 8.0mm x 8.0mm leadless laminate MCM. This module is internally matched to 50Ω on all RF ports, making it easy to use with no external matching components required.
  6. W-Band Low Noise Amplifiers
    5/29/2014

    Northrop Grumman Microelectronics Products & Services’ latest entry in their series of W-band products include two new InP HEMT low noise amplifiers covering the 71-96 and 80-100 GHz frequency ranges. Both amplifiers are ideal for applications involving W-band imaging, sensors, radar, and short haul/high capacity links.

  7. 3-Channel Low Noise Amplifier
    8/14/2017

    Corry Micronics offers the CMILNA-847-1747-S broadband low noise amplifier (LNA) with three independently amplified channels in a common housing. Features include an ultra-low noise figure of 2 dB and greater than 18 dB of gain, making this LNA ideal for a number of applications, such as cellular base stations, software defined and field communication radios, FM and AM receivers, switch matrices, lab use, WiFi, surveillance sub-systems, satellite systems, and other pre-amplification applications.

  8. FEMs, LNA, PAs, and Switches for Video Game Consoles
    4/1/2014

    If the last few generations of video consoles taught us anything, it’s that gamers have almost entirely embraced internet connectivity in their systems, and that wired controllers are a thing of the past. This page provides an overview of Skyworks’ front-end modules, low noise amplifiers, switches, and power detectors used in Sony, Microsoft, and Nintendo consoles. These components help facilitate online play and wireless controller connectivity.

  9. Low-Noise Amplifier With Bypass Mode In Low Profile Package - MGA-655T6
    6/27/2008
    Avago Technologies' MGA-655T6 is an economical easy-to-use GaAs MMIC Low Noise Amplifier (LNA) with Bypass mode. The Bypass mode enables the LNA to be bypassed during high input signal power and reduce current consumption. Its housed in a low profile 2 x 1.3 x 0.4mm 6-pin Ultra Thin Package.
  10. RF2815: GPS Low-Noise Amplifier With Integrated Filter
    1/23/2009
    The RF2815 is a high-performance low-noise amplifier (LNA) module with integrated cellular and PCS band filtering. Developed for use in GPS receivers, this module provides an excellent combination of low noise figure, high gain, high linearity, and low power consumption which is ideal for battery-operated GPS solutions.