current-probes-products

  1. FCC-4 Tuned Dipole Antenna - 325 MHz - 1000 MHz 11/22/2008

    A.H. Systems FCC-4 half-wave dipole antenna, consisting of a matching balun, two horizontal elements, and a mounting clamp and tape measure to adjust the element lengths, is the simplest form of antenna.

  2. SSISOV100V20M18G System 4/21/2021

    The SSISOV100V20M18G System is designed to generate up to 100 V/m CW at a 2m test distance for ISO 11451-2 full-vehicle testing from 20MHz-18GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.

  3. 2.4+5-7 GHz edgeBoost™ BAWplexer: QPQ2456 5/13/2021

    The QPQ2456 from Qorvo is a high-performance, high power, BAWplexer. This product takes advantage of Qorvo's edgeBoost™ technologies which deliver extremely steep skirts, while simultaneously exhibiting low loss in the Wi-Fi bands and high near-in rejection. 

  4. WiBro/WiMAX Filter Balun - P/N 2345FB39A0050 6/22/2007
    Johanson Technology, Inc (JTI) offers the 2345FB39A0050 WiBro/WiMax Filter Balun for the Mobile WiMax market (802.16e). This 50:50 Balun and Bandpass filter integrated passive component covers the 2.3 to 2.390 GHz band
  5. S-Band GaN Solid State Power Amplifier 3/17/2025

    The VSS3607 GaN Solid State Amplifier uses GaN transistors to provide high gain, high efficiency, and excellent pulse fidelity for pulsed radar applications. This model is designed to operate in the 2.7-2.9 GHz frequency band.

  6. 3 – 1000 MHz 75 Ohm Matrix Switch With 2 x 8 Blocking: 75MS-029 7/10/2020

    JFW offers the 75MS-029 75 Ohm blocking matrix switch that operates from 3 – 1000 MHz. This switch can be used to fan-out connections from a 2-port 75 Ohm network analyzer to allow for automated multi-port 75 Ohm testing. 

  7. ArchiTek FPGA Development Suite For Talon Recorders 5/29/2020

    The ArchiTek™ FPGA Development Suite is designed to allow FPGA design engineers to add custom IP to a number of Pentek's Talon recording systems. FPGA IP can be added to the recorder to provide real-time, on-the-fly digital signal processing during the data acquisition process, greatly reducing the time associated with post-processing recorded data. ArchiTek provides a simple development environment that allows engineers to add FPGA IP such as threshold detection, spectral filtering, digital downconversion, demodulation, or any other digital signal processing technique required.

  8. DC - 70GHz Chip Scale Package Limiter: HLM-70CSP2 6/6/2024

    The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss.

  9. RF-to-IF Front-end Receiver 5/24/2000
    The RFR3300 is an RF-to-IF front-end receiver designed for cellular, PCS and GPS signal processing
  10. Microwave / RF Cable Assemblies 10/30/2006
    Gore has developed and proven the effectiveness of a wide range of cable assemblies specifically tailored to the needs of microwave signal transmission