current-probes-products

81. Heavy-Duty, Non-Conductive Antenna Support and Positioner 10/10/2005

    The Model AP5010B Antenna positioner,a heavy-duty non-conductive support and positioner for the AR RF/Microwave Instrumentation AT5026A or AT2526A high-gain log-periodic antennas.Built on casters, with leveling feet,for easy movement in a shielded room or open site testing, the AP5010B allows the test engineer to position the antenna for either vertical or horizontal polarization as well as permitting the antenna to be tilted 30 degrees.

82. Low Noise Preamplifiers 10/21/2008

    A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB.

83. Real-Time Handheld Spectrum Analyzer: SignalShark 3320 4/25/2018

    Narda Safety Test Solutions offers the SignalShark Real-Time Handheld Analyzer for the detection, analysis, classification, and location of RF signals between 8 kHz and 8 GHz. The instrument solves complex measurement and analysis tasks reliably and quickly, and with the same RF performance levels as desktop instruments.

84. 70dB SDLVA - Successive Detection Log Video Amplifier 2/29/2008
    The Model SLVAC-0102-70M OPTION LA is a Miniature Successive Detection Log Video Amplifier (SDLVA) Implemented with Wideband Hybrid MIC/MMIC Technology operating over the 120 MHz to 200 MHz bandwidth and able to detect noise in the 10 MHz to 1 GHz range.
85. Low-Cost, 900 MHz Cavity Bandpass Filters 4/28/2009

    Corry Micronics offers custom and off-the-shelf cavity Bandpass filters for 900 MHz Communications Systems. The new line of Bandpass filters are designed to cover the spectrum from 902 to 927. These four cavity filters offer superior rejection with very low insertion loss.

86. MCX Connectors and Cable Assemblies 5/1/2006
    MCX microminiature connectors are suitable for 50 ohm applications and provide repeatable performance from DC to 6 GHz
87. Digitally Controlled Phase Shifter: PS-500M2G-8B-SFF 2/23/2013

    This 8-Bit Digitally Controlled Phase Shifter covers the 500MHz to 2.0GHz frequency range and features a 500nsec switching speed, a ±10 degrees phase shift error, a less than ±1dB amplitude error, 360 degrees of phase shift through 8-Bit TTL control, and a typical insertion loss of 10dB. This phase shifter operates on ±15VDC and is supplied in a housing measuring 4.95" x 3.38" x 1.00".

88. 45 – 1218 MHz CATV Push Pull Amplifier: QPA8801 11/8/2019

    The QPA8801 is an ultra-linear, QFN GaAs amplifier MMIC intended for output stage amplification in CATV infrastructure applications. The device features a push-pull cascade design which provides flat gain along with ultralow distortion, making it ideal for use in CATV distribution systems requiring high output power capability.

89. L-Band Planar Array Antennas 5/9/2014

    These transmit and receive L-band planar array antennas feature 14 dB gain, a wide bandwidth, linear polarization, and low return loss. They’re ideal for use in point-to-point applications, in RF transmitters and receivers, and in satellite communications.

90. Spread Spectrum Radios 11/17/1998
    The 900 SS Microhopper, 900 SS Direct Autobaud, and the 900 SS Hopper IP are three radios that range from 900 MHz Spread Spectrum transceiver to a robust, internet protocol (IP) enabled spread spectrum transceiver