current-probes-products

  1. 2.4 GHz Wi-Fi/BT/LTE Co-Existence BAW Filter: QPQ1907 9/4/2018

    Qorvo’s QPQ1907 is a high-performance, high power Bulk Acoustic Wave (BAW) band-pass filter designed to enable coexistence of WiFi and LTE signals within the same device or in close proximity to one another. This device is ideally used in WiFi/Bluetooth, consumer premise equipment (CPE), small cells, and smart meter applications.

  2. HBM Board Solutions Optimized For SWaP 2/8/2022

    The Xilinx Virtex UltraScale+ on-chip high-bandwidth memory (HBM), coupled with the FPGA’s logic and DSP density, enables the Models 5585 and 5586 to be single-slot 3U VPX processing powerhouses. All with a SOSA-aligned 3U profile for proven, rapid technology insertion and risk reduction.

  3. 6.0 - 18.0 GHz, 400 Watt Solid State High Power Amplifier: AMP2065DD-LC 1/13/2025

    The AMP2065DDv-LC is purpose-built for EMI/RFI testing, laboratory applications, and HIRF (High-Intensity Radiated Fields) or pulse operations, delivering exceptional performance and reliability in critical testing and operational environments.

  4. Power Amplifiers For WiMAX Applications 7/26/2006
    Mimix Broadband's family of internally pre-matched power amplifiers are designed for linear WiMAX applications at 700 MHz, 2.5 GHz and 3.5 GHz. These devices are processed in a highly repeatable InGaP high voltage HBT process and include on-chip diodes for ESD protection...
  5. 2.0 - 18.0 GHz, 30 Watt Solid State High Power Amplifier: AMP10145 10/31/2025

    This Class AB linear GaN amplifier delivers wide instantaneous bandwidth and high reliability for single-channel modulation applications, covering 2–18 GHz.

  6. High-Linearity 5 GHz Front-End Modules: RFFM8500Q 8/5/2015

    The RFFM8500Q is a 4.9GHz - 5.85GHz high-linearity Front End Module (FEM) integrated with a power amplifier (PA), a single pole double throw (SPDT) switch, an LNA and a power detector coupler to improve accuracy and meet RF front end needs for an IEEE 802.11 a/n WiFi system.

  7. 8MHz to 6.4GHz Phase Detector: HX3400 2/15/2023

    The Holzworth HX3400 Phase Detector was designed with an emphasis on making phase noise measurements and to be used in analog phase locked loops where performance is a priority. 

  8. DC - 70GHz Chip Scale Package Limiter: HLM-70CSP2 6/6/2024

    The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss.

  9. 7.9 - 11 GHz, 15 Watt GaN Power Amplifier: QPA1010, QPA1010D 9/14/2021

    Qorvo's QPA1010, QPA1010D are X-band high power MMIC amplifiers, fabricated on Qorvo's production 0.15um GaN on SiC process (QGaN15). These amplifiers operate from 7.9 - 11 GHz and typically provide 15 W saturated output power with power-added efficiency of 38% and large-signal gain of 18 dB.  

  10. 1.0 - 6.0 GHz, 400 Watt Solid State High Power Amplifier: AMP20179 10/31/2025

    Designed for broadband EMI/RFI, lab, GTEM, and IEC testing applications, the AMP2030B-LC delivers high-performance RF amplification in a compact, rack-mounted form factor.