current-probes-products

31. Power Monitor/Detector 7/22/1998
    The MIC-E-46S power monitor detector unit from KDI/triangle Corp. can be used in various applications to calibrate main-line circuit power
32. AK-2G Antenna Kit - 20 Hz - 2 GHz 11/10/2008

    Constantly changing for today's dynamic environment, A.H. Systems presents the proven line of Antenna Kits. Designed to meet the needs of your various testing requirements.

33. 26.5 - 40 GHz, 10W Min Solid State High Power Amplifier: AMP4072A 7/12/2023

    The AMP4072A solid-state, high-power amplifier has a broad frequency range of 26.5 to 40.0 GHz with a power output of 10 watt minimum and 12 watt typical in continuous wave (CW) or pulse mode at Psat, and 8 watt typical at P1dB.

34. Holzworth Ultra Low Jitter Amplifier: HX2410 4/28/2011

    The HX2410 CW to CMOS Conversion Amplifier is intended for use as a peripheral component in precision oscilloscope test applications. The HX2410 eliminates trigger induced jitter that is caused by the low slew rate of low frequency sinusoidal (CW) trigger signals, ultimately resulting in inaccurate oscilloscope measurements. The proprietary architecture maintains the integrity of an ultra low phase noise sinusoidal (CW) signal while converting it to a CMOS Logic level exhibiting the absolute lowest jitter available.

35. WR-12 (60-90GHz) Power Divider: PD20-1200WG 5/22/2024

    The C10-1200WG is a WR12 10dB waveguide coupler featuring high directivity over a 60-90GHz operational bandwidth built with high precision and then gold plated for high corrosion resistance.

36. Current Probe Fixture: CPF-632 2/19/2025

    This CPF-632 Current Probe Fixture calibrates small-diameter probes (1.25" ID) for 20 Hz–500 MHz measurements, using a trough transmission line to enable accurate current measurement via RF voltmeter.

37. 4 – 18 GHz TWT Amplifiers 5/13/2019

    dB Control offers a series of TWT amplifiers with operating capabilities throughout the 4 – 18 GHz frequency range from 2 to 4 kW. With their high frequency bandwidth and power options, these amplifiers are ideal for radar, electronic countermeasures, electronic warfare simulation, test/measurement, antenna pattern, and radar cross-section measurement applications.

38. 4x4 Butler Matrix: KBM9005010 3/9/2023

    The new KRYTAR 4×4 Butler Matrix uses KRYTAR’s high-performance 90- and 180-degree Hybrid Couplers providing super phase accuracy, amplitude imbalance, stability and repeatability.

39. S-Band Switched Filter Bank Module: QPB1036 11/3/2025

    The QPB1036 is a S-Band switched filter bank module that integrates two switches on both sides of 6 filters and a bypass.

40. SAS-522-2 Bilogical Antenna 11/22/2008

    The SAS-522-2 is a bilogical antenna designed to provide and inexpensive solution to wideband applications ranging from 25 MHz to 2 GHz in environments from shielded enclosures to the outdoors. Suitable for FCC, MIL-STD, VDE, TEMPEST and immunity testing, the SAS-522-2 provides consistent and reliable measurements. The antenna also eliminates the need for antenna switching and therefore makes this unique hybrid a versatile performer.