current-probes-products
-
Bilogical Antenna Kit: AK-521F-7
11/8/2023
For rapid deployment along with the mobility of a small package, this Bilogical Antenna Kit provides an inexpensive solution to broadband applications.
-
Passive Loop Antenna: SAS-565H
5/18/2021
The easiest method to avoid antenna saturation for the measurement of high magnetic fields is to use a passive antenna. This Passive Loop Antenna is designed with a balanced faraday shield for magnetic field emissions and immunity type measurements.
-
Ray Tracing Simulation And Propagation Methods
3/9/2022
Ray-tracing methods use discrete rays to represent advancing wavefronts as they propagate from a transmitter through a scene. Rays interact with geometry in the scene through reflections, diffractions, and transmissions. The two dominant ray-tracing methods are Shooting-and-Bouncing Rays and Image Theory. Remcom’s software combines these two methods to leverage the advantages of each.
-
Sky5 LB/MLB/MB/HB Diversity Receive Module: SKY53746-11
3/23/2023
The SKY53746-11 is a diversity receive module and is scalable to support two CA MIMO regional and roaming band requirements. The SKY53746-11 is part of our Sky5 product portfolio.
-
ICS-110B
11/20/2002
32-Ch., 100 kHz/Ch., 24-Bit Sigma-Delta ADC Board
-
Interactive RF Design Tools
4/20/2017
Qorvo offers a collection of interactive design tools for assisting engineers during critical design stages, including calculators, converters, and tables such as the Maximum Power Reduction Calculator, RF Impedance Matching Calculator, Noise Figure & Noise Temperature Calculator, and the VSWR/Return Loss Conversion Table.
-
Ultra-Low Loss Shielded Power Inductors: XGL1060 Series
9/19/2022
XGL1060 molded power inductors offer low DC losses and low power losses for DC-DC converters. Other performance benefits include a wider range of inductance values and improved Irms current ratings.
-
Space Qualified And Thermal Vacuum Coaxial Terminations
8/19/2022
KRYTAR's selection of rugged, 50 Ohm mechanical coaxial terminations are useful for unused ports and isolated ports of hybrids and combiners, as well as protection against signal reflections.
-
26.5 – 41 GHz Ka-Band Power Amplifier: SBP-2734132530-KFKF-E1-HR
2/28/2020
The Model SBP-2734132530-KFKF-E1-HR from SAGE Millimeter is a power amplifier operating in the 26.5 to 41 GHz frequency range that is ideally used for applications utilizing radar systems, communication systems, and testing equipment.
-
CHV2711-QJ - 3.5 GHz InGaP HBT 5W Linear Power Amplifier
7/5/2006
The CHV2711 internally pre-matched power HBT device provides 9.5dB of gain, 2.5% EVM at 29.5 dBm output power for 802.16 OFDM signal with a peak to average power ratio of 9 dB. The device operates off a single supply voltage up to 12V and includes internal bias circuitry to enable exact setting of the quiescent current using an external Vcontrol...