Hot Products
-
6 GHz Ultra-Wideband RF/IF Recorder Extends Recording Bandwidths
10/15/2020
The Talon RTR 2742 is a turn-key record and playback system for ultra-wideband analog RF/IF signals. Using two 12-bit, 6.4 GHz A/D converters, this system can achieve sustained recording of 2.4 GHz bandwidth signals at rates up to 6 GBytes per second.
-
High-Speed Synchronizer And Distribution Board 3U VPX: Model 5903
10/2/2020
The Model 5903 High-Speed Synchronizer and Distribution Board from Pentek is designed to synchronize multiple Pentek Quartz family boards within a system. It enables synchronous sampling and timing for a wide range of multichannel high-speed data acquisition, DSP, radar, EW, and software radio applications.
-
100 Gigabit Ethernet Recorder for Pentek's Quartz RFSoC: Talon RTR 2757
8/25/2020
The Talon RTR 2757 is a turnkey system designed for recording 200 Gigabit Ethernet UDP streams. It is designed to capture digitized data from four of these streams in real time at the full 100 Gigabit per second rate. With up to 122 TB of removable solid-state storage, the RTR 2757 provides hours of multi-channel wideband signal recording.
-
8 Channel A/D & D/A Zynq UltraScale+ RFSoC Processor PCIe: Model 7050
7/29/2020
The Model 7050 from PENTEK is an 8-channel high-performance PCIe board based on the Xilinx® Zynq® UltraScale+™ RFSoC. With an on-board GPS receiver and 16 GB of DDR4 SDRAM, this device is ideal for high-bandwidth data streaming, waveform signal generators, multimode data acquisition, remote monitoring, and 5G development.
-
ArchiTek FPGA Development Suite For Talon Recorders
5/29/2020
The ArchiTek™ FPGA Development Suite is designed to allow FPGA design engineers to add custom IP to a number of Pentek's Talon recording systems. FPGA IP can be added to the recorder to provide real-time, on-the-fly digital signal processing during the data acquisition process, greatly reducing the time associated with post-processing recorded data. ArchiTek provides a simple development environment that allows engineers to add FPGA IP such as threshold detection, spectral filtering, digital downconversion, demodulation, or any other digital signal processing technique required.
-
26 GHz Sentinel Intelligent Signal Scanner Recording System: Talon® RTX 2684
2/26/2020
Pentek offers the Talon® RTX 2684 as a 26 GHz sentinel intelligent signal scanner recording system. The system provides SIGINT engineers the ability to scan the RF spectrum from 1 GHz to 26 GHz for signals of interest and monitor or record bandwidths up to 500 MHz wide.
-
Pentek Flexor Family
3/19/2019
The Flexor® line of FMC analog modules and OnyxFX™ FMC carrier boards combines the high performance of the Virtex-7 FPGA with the flexibility of the FMC data converter thereby creating a complete radar and software radio solution. As a FlexorSet® integrated solution, the analog I/O FMC is factory-installed on the FMC carrier. The required FPGA IP is installed, and the board set is delivered ready for immediate use.
-
Pentek Talon® High-Speed Recording Systems
3/19/2019
Pentek offers Talon® High-Speed Recording Systems designed to eliminate the time and risk associated with new technology system development. With increasing pressure in both the defense and commercial arenas to get to the market first, today’s system engineers are looking for more complete off-the-shelf system offerings. Out of the box, these systems arrive complete with a full-featured virtual operator control panel ready for immediate data recording and/or playback operation.
-
Pentek Onyx Family
3/19/2019
The Pentek Onyx® family includes radar, and software radio boards based on the Xilinx Virtex-7 FPGA. This comprehensive product line offers products that satisfy a wide range of applications. All of the board’s data and control paths are accessible by the FPGA, enabling factory installed functions including data multiplexing, channel selection, data packing, gating, triggering and memory control. The Onyx architecture organizes the FPGA as a container for data processing applications where each function exists as an (IP) module.
-
Pentek Cobalt® Family
3/6/2019
The Pentek Cobalt® architecture features a Virtex-6 FPGA. All of the board’s data and control paths are accessible by the FPGA, enabling factory-installed functions including data multiplexing, channel selection, data packing, gating, triggering and memory control. The Cobalt architecture organizes the FPGA as a container for data-processing applications where each function exists as an intellectual property (IP) module.