Products and Services
-
2 To 6 GHz High Linearity Gain Block: MGA-30789
1/13/2010
Avago Technologies’ 2-6 GHz High Linearity Gain Block: MGA-30789 is a broadband, high linearity gain block MMIC amplifier achieved through the use of Avago Technologies' propietary 0.25um GaAs Enhancement-mode pHEMT process.
-
Ultra-Low Noise Bypass LNAs: TQL9063 (1-Stage) & TQL9065 (2-Stage)
9/24/2015
Qorvo offers high-linearity, ultra-low noise gain block amplifiers with integrated bypass mode functionality. With a 1-stage model and a 2-stage model, these LNAs are ideal for a wide range of applications including base station receivers, tower mount amplifiers, repeaters, FDD-LTE, TDD-LTE, WCDMA, and general purpose wireless systems.
-
0.1 – 10.0 GHz Broadband Gain Block: GRF2003
2/27/2017
Guerrilla RF offers the GRF2003 broadband, low noise linear gain block amplifier ideally suited for small cell, wireless infrastructure, and other high performance RF applications such as those with microwave backhaul, C/X-band amplifiers, general purpose amplifiers, and instrumentation. Single match RF performance is rated over the 0.5 to 10.0 GHz frequency range, but the device may operate down to 100 MHz with optimized external components.
-
0.1 To 8.0 GHz InGaP HBT Matched Gain Block Amplifier Chip
12/1/2004
Celeritek’s CGB7014-BD is a Darlington Configured, high dynamic range, utility gain block amplifier MMIC chip with 18.5dB of gain at 6 GHz
-
20 MHz to 6 GHz Gain Block Amplifier: AM1016
12/2/2014
Atlanta Micro’s AM1016 is a cascadable gain block amplifier with 14 dB gain, a 2.0 dB noise figure, +30 dBm OIP3, +17 dBm P1db, a 3.3V, 48 mA supply, a -40C to +85C operating temperature, and unconditional stability. It’s operational to +1.7V and comes in a 3mm QFN package.
-
0.09 - 10 GHz High Dynamic Range Gain Block: ADM-8095PSM
4/16/2024
The ADM-8095PSM is a high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz that can serve either as a linear signal amplifier or a saturated driver amplifier.
-
2.3 – 3.8 GHz 100 Ohm Differential Output Gain Block: QPA9154
2/11/2020
Qorvo offers the QPA9154 wideband gain block with a 50 Ω single-ended input to 100 Ω differential output. It is ideally suited as the 5G m-MIMO BTS Rx path final gain stage, to directly interface with the ADC of the transceiver, eliminating the need for a discrete balun.
-
CBG7003-BD 0.1 to 6.0 GHz InGaP HBT Matched Gain Block Amplifier Chip
2/3/2005
Celeritek’s CGB7003-BD is a Darlington Configured, high dynamic range, utility gain block amplifier MMIC chip. Designed for applications operating between 0.1 and 6.0 GHz, Celeritek’s broadband, cascadable, gain block amplifier is ddeal solutions for transmit, receive and IF applications.
-
0.1 To 6.0 GHz InGaP HBT, MMIC Or Packaged, Matched Gain Block Amplifier
10/29/2004
The CGB7001-SC (-BD) is a Darlington Configured, high dynamic range, utility gain block amplifier. Designed for applications operating within the 0.1 GHz to 6.0 GHz frequency range, Celeritek’s broadband, cascadable, gain block amplifiers are ideal solutions for transmit, receive and IF applications.
-
High Linearity Gain Block Amplifiers With Broadband Compressed Output Power
2/8/2016
Guerrilla RF Inc. offers two new models of high linearity gain block amplifiers featuring a combination of simple-application schematics, flat gain, and high compressed output power with operation in the DC to 4 GHz frequency range. The GRF2012 and GRF 2013 models include flexible biasing for high levels of re-use within single designs and multiple platforms. They are ideally used as cost-effective pre-drivers for broadband GaN high power amplifiers, and for many other general purpose, high performance gain block applications.