Products and Services
-
0.1 To 6.0 GHz InGaP HBT, MMIC Or Packaged, Matched Gain Block Amplifier
10/29/2004
The CGB7001-SC (-BD) is a Darlington Configured, high dynamic range, utility gain block amplifier. Designed for applications operating within the 0.1 GHz to 6.0 GHz frequency range, Celeritek’s broadband, cascadable, gain block amplifiers are ideal solutions for transmit, receive and IF applications.
-
TMS Tactical/Airborne SATCOM Systems
4/22/2015
Teledyne Microwave Solutions (TMS) offers a wide range of RF modules specifically designed to meet demanding small size, weight, power and cost (SWaP-C) applications in the Land, Air and Marine markets. Using unique chip and wire capabilities TMS offers extremely rugged and reliable products suitable for the most demanding platforms.
-
20 MHz to 6 GHz Gain Block Amplifier: AM1024
12/26/2014
Atlanta Micro’s AM1024 is a high dynamic, cascadable gain block amplifier that covers the 20 MHz to 6 GHz range and comes in a 3mm QFN package. It can be powered by either a +3.3VDC or +5.0VDC power supply and features flat gain (20 dB) and a noise figure of 2.0/3.3 dB.
-
2 - 6 GHz High Linearity Gain Block: MGA-30989
1/20/2010
The 2 – 6 GHz High Linearity Gain Block: MGA-30989 is a broadband, high linearity gain block MMIC amplifier achieved through the use of Avago Technologies’ proprietary 0.25um GaAs Enhancement-mode pHEMT process.
-
High Linearity, Ultra-Low Noise Gain Block Amplifier: QPL6207Q
7/25/2019
Qorvo’s QPL6207Q is a high linearity, ultra-low noise gain block amplifier ideally designed for SDARS active antenna applications. At 2332 MHz, the amplifier typically provides +35 dBm OIP3. The amplifier does not require any negative supplies for operation and can be biased from positive supply rails from 3.3 to 5.25 V.
-
40MHz - 2600MHz Flat Gain High Linearity Gain Block: MGA-30889
1/20/2010
The 40MHz - 2600MHz Flat Gain High Linearity Gain Block: MGA-30889 from Avago Technologies is a broadband, flat gain, high linearity gain block MMIC amplifier achieved through the use of Avago Technologies’ proprietary 0.25um GaAs Enhancement-mode pHEMT process.
-
2.3 – 3.8 GHz 100 Ohm Differential Output Gain Block: QPA9154
2/11/2020
Qorvo offers the QPA9154 wideband gain block with a 50 Ω single-ended input to 100 Ω differential output. It is ideally suited as the 5G m-MIMO BTS Rx path final gain stage, to directly interface with the ADC of the transceiver, eliminating the need for a discrete balun.
-
0.1 – 10.0 GHz Broadband Gain Block: GRF2003
2/27/2017
Guerrilla RF offers the GRF2003 broadband, low noise linear gain block amplifier ideally suited for small cell, wireless infrastructure, and other high performance RF applications such as those with microwave backhaul, C/X-band amplifiers, general purpose amplifiers, and instrumentation. Single match RF performance is rated over the 0.5 to 10.0 GHz frequency range, but the device may operate down to 100 MHz with optimized external components.
-
CBG7003-BD 0.1 to 6.0 GHz InGaP HBT Matched Gain Block Amplifier Chip
2/3/2005
Celeritek’s CGB7003-BD is a Darlington Configured, high dynamic range, utility gain block amplifier MMIC chip. Designed for applications operating between 0.1 and 6.0 GHz, Celeritek’s broadband, cascadable, gain block amplifier is ddeal solutions for transmit, receive and IF applications.
-
20 MHz to 8 GHz Gain Block Amplifier: AM1023
12/15/2014
This gain block amplifier covers the 20 MHz to 8 GHz frequency range. It exhibits flat gain (19 dB), a 2.5 dB noise figure, and unconditional stability over the -40C to +85C operating temperature range. It comes in a 3mm QFN package and is operational to 1.7V.