Featured Solutions

  1. 10kHz-250MHz, 2.5KW High Power Amplifier: AMP20162 2/21/2025

    The AMP20162 solid state high-power amplifier is designed for EMI/RFI testing, laboratory use, and general communication applications.

  2. Passive GaAs MMIC IQ Mixer: MMIQ-0416LS 2/19/2025

    The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer.

  3. 6dB DC-40GHz MMIC Attenuator: ATN06-0040BH 2/19/2025

    The ATN06-0040BH is a connectorized GaAs MMIC 6dB attenuator in a Bullet housing package.

  4. Current Probe Fixture: CPF-633 2/19/2025

    The CPF-633 Current Probe Fixture calibrates large-diameter probes (2.6" ID) for 20 Hz–500 MHz measurements, using a trough transmission line to enable accurate current measurement via RF voltmeter.

  5. Current Probe Fixture: CPF-632 2/19/2025

    This CPF-632 Current Probe Fixture calibrates small-diameter probes (1.25" ID) for 20 Hz–500 MHz measurements, using a trough transmission line to enable accurate current measurement via RF voltmeter.

  6. ECSM: Equivalent Capacitance Fixture Kit 2/19/2025

    This Equivalent Capacitance Fixture is used for the verification and calibration of the active monopole antennas.

  7. 44 V BLDC Controller And Driver: PAC52422 2/19/2025

    The AC52422 integrates a 50MHz Arm Cortex-M0 microcontroller, advanced power management, and enhanced features, optimizing smart energy appliances with compact, efficient, and highly configurable system-on-chip technology.

  8. 2 - 22 GHz MMIC 2-Way Wilkinson Power Divider/Power Splitter: MPD-0222FCSP2 1/22/2025

    The MPD-0222FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package.

  9. ADP Series 2.4mm Male to 2.92mm Female Adapter: ADPMVFK 1/22/2025

    The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.

  10. Chip Scale Package MMIC 70 GHz 3dB Attenuator: ATN03-0070CSP1 1/22/2025

    The ATN03-0070CSP1 is a surface mount GaAs MMIC 3dB attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.