Products and Services

  1. 1.20 - 1.40 GHz, 4400 W Min Solid State High Power Pulse Amplifier: AMP4087P-4.4KW 5/6/2024

    The AMP4087P-4.4KW is a solid-state high-power pulse amplifier tailored for L-Band radar. Offering 4400 Watts minimum output power, it serves as an efficient TWT driver or standalone unit.

  2. 750 V, 23 mohm SiC FET: UJ4C075023L8S 3/14/2024

    The UJ4C075023L8S is a G4 SiC FET based on a unique ‘cascode’ circuit configuration where a normally-on SiC JFET is co-packaged with a Si MOSFET to produce a normally-off SiC FET device.

  3. TDS-535 Tuned Dipole Set (Single) 11/13/2008

    Model TDS-535 Tuned Dipole Set provides an accurate standard for precise EMI and site attenuation measurements (per OET-55 and ANSI C63.5). This half wavelength dipole set is manufactured per the FCC balun design and is individually calibrated per ANSI C63.5 at 3 and 10 meters.

  4. Wavguide Diplexer 12/12/1998
    Developed for point-to-point radio and base-station link applications, a 38-GHz diplexer features a 37018 to 37658 MHz low pass band
  5. Digitally Tunable, High-Pass And Low-Pass Filter: ADMV8913 6/8/2021

    The ADMV8913 is a fully monolithic microwave integrated circuit that that features a digitally selectable frequency of operation. The device has an integrated high-pass filter and an integrated low-pass filter, that allow a pass-band response within the 7 to 12 GHz frequency range.

  6. 0.7 - 6.0 GHz, 15 Watt Typ Solid State High Power Amplifier: AMP1002BLW 3/21/2024

    The AMP1002BLW is a solid-state high-power amplifier with a Class AB linear GaN design, offering instantaneous wide bandwidth suitable for various modulation standards.

  7. Automatic Radio-Controlled Drone Identification Solution: R&S®ARDRONIS 9/30/2020

    The R&S®ARDRONIS is an automatic radio-controlled drone identification solution designed to detect commercial drone activity, automatically classify the type of drone signal, determine the direction of the drone and its pilot, and disrupt the radio control link.

  8. RF Power Amplifier: KAW2020M16 8/15/2022

    The Model KAW2020M16 is a Class AB wideband RF power amplifier delivering in excess of 100 Watts into a 50-Ohm load over the frequency range of 220MHz to 245MHz. 

  9. SSISOV100V20M18G System 4/21/2021

    The SSISOV100V20M18G System is designed to generate up to 100 V/m CW at a 2m test distance for ISO 11451-2 full-vehicle testing from 20MHz-18GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.

  10. 2-22 GHz Highly Robust GaN LNA: TGA2227-SM 9/23/2015

    The TGA2227-SM is a highly robust GaN Low-Noise Amplifier (LNA) covering the 2-22 GHz frequency range, and delivers >15 dB small signal gain and >+22 dBm P1dB while supporting 2 dB mid-band Noise Figure. This LNA offers a high overall electrical performance, and a high level of input power robustness for more design flexibility in the receive chain circuit protection.