Products and Services

  1. 8 – 12 GHz, 10 W GaN SPDT Switch: QPC2040 7/1/2020

    Qorvo introduces the QPC2040 single-pole, double-throw (SPDT) switch operating within the 8 – 12 GHz frequency range for commercial and military radar, communications, electronic warfare, test instrumentation, and other general purpose applications. The switch typically supports 10 W input power handling at control voltages of 0/−2 V for both CW and pulsed RF operations.

  2. SkyOne ET Front-End Module: SKY58211 4/18/2022

    The SKY58211 Envelope Tracking Front-End Module (FEM) is a multimode multiband (MMMB) module with integrated Low Noise Amplifiers (LNAs), which supports 2.5G / 3G / 4G / 5G and CDMA handsets, and operates efficiently in WCDMA, HSPA, and LTE modes. 

  3. MLDD 4-Way Power Dividers 12/15/2022

    KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications.

  4. Assembly With 24 Attenuators: 50PA-1197 4/23/2021

    The 50PA-1197 from JFW is a 50 Ohm benchtop attenuator assembly that contains 24 solid-state step attenuators. The attenuators can be controlled manually with the keypad or remotely via Ethernet or Serial connection.

  5. Aerial Monitoring System: R&S AMS 2/14/2022

    Whether you are monitoring airspace for 5G C-band interference or checking microwave links, the R&S AMS (aerial monitoring system) is a payload for drones that provides monitoring and analysis capabilities for VHF/UHF/SHF transmissions that are difficult to measure from the ground.

  6. DC-18GHz, 8 x 8 Blocking Matrix Switch: 50MS-404 7/9/2021

    Model 50MS-404 is an 8X8 blocking matrix switch.  All unused ports are absorptive (i.e. self-terminating into 50 Ohm).  It is available with 50 Ohm N or SMA female connectors. 

  7. Beamformers: Analog Devices 4/7/2021

    Analog Devices beamformers offer best-in-class performance with the highest levels of integration for optimum scalability and antenna array simplification. These beamformers integrate multiple channels, and each has independent phase and amplitude control in their transmit and receive paths, allowing the RF and microwave front end to electronically steer the antenna beams for an optimum transmission aiming pattern. The high level of integration enables systems, whether they are for communications, radar, electronic warfare or radio, to deliver higher levels of performance in a smaller size while reducing system costs. The beamformer IC integrates additional functionality such as digital control circuitry, power detectors, on-chip memory, power management blocks, and more for a complete antenna steering solution.

  8. 3 – 1000 MHz 75 Ohm Matrix Switch With 2 x 8 Blocking: 75MS-029 7/10/2020

    JFW offers the 75MS-029 75 Ohm blocking matrix switch that operates from 3 – 1000 MHz. This switch can be used to fan-out connections from a 2-port 75 Ohm network analyzer to allow for automated multi-port 75 Ohm testing. 

  9. EMI Filters And Capacitors 1/9/2017

    Knowles Capacitors’ excellence in ceramic materials technology, combined with EMI filter expertise, enables an unequalled range of EMI filter products including surface mount filters, panel mount filters, planar arrays, discoidal multilayer capacitors, X2Y integrated passive components, and other filter types for hi-rel applications.

  10. Standard Gain Horn Antenna 1.70 GHz to 2.60 GHz:SAS-581 11/12/2008

    The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor.