RF Test And Measurement Resource Center

TEST & MEASUREMENT APPLICATION NOTES AND WHITE PAPERS

Transmit And Receive Testing Of Digital Waveforms Using R&S®CMA180
The compact R&S®CMA180 Radio Test Set allows straightforward tests on devices that use analog or digital modulation and demodulation formats. This application note focuses on the use of the digital radio capabilities for measurements on radio transceiving devices in terms of their functionality and parameter characterization. Also shown is how to use the instrument with the various software tools available from Rohde & Schwarz for creating and evaluating digitally modulated signals.
Certium VCS Test System For Aircraft Manufacturers
New aircraft need to have their radiocommunication systems tested with compact voice communication systems like CERTIUM VCS. This is cost-effective, space-saving, and scalable thanks to its IP-based infrastructure.
De-Embedding Test Fixtures For High-Speed Digital Applications
Test fixtures are commonly used in high-speed digital measurement to connect devices to measurement equipment. Characterization and analysis in time and frequency domains help remove the influence of these fixtures.
Testing A 24-28GHz Power Amplifier Using The 5G New Radio Test Standard
In this white paper, we will introduce some of the main challenges in test and measurement of a device at mmWave frequencies, with a 26 GHz pioneer band defined for the UK between 24.25 - 27.5 GHz.
Simplify Coexistence And Interference Testing For GNSS Receivers
The R&S®SMW200A GNSS simulator offers an easy and convenient way to test your receiver design against a wide variety of potential interferers and jammers. Test cases extend from simple coexistence simulations to complex interference scenarios with localized emitters.

More Test & Measurement Application Notes and White Papers

TEST & MEASUREMENT SOLUTIONS

8 – 12 GHz, 10 W GaN SPDT Switch: QPC2040

Qorvo introduces the QPC2040 single-pole, double-throw (SPDT) switch operating within the 8 – 12 GHz frequency range for commercial and military radar, communications, electronic warfare, test instrumentation, and other general purpose applications. The switch typically supports 10 W input power handling at control voltages of 0/−2 V for both CW and pulsed RF operations.

TWT Amplifier: dB-3906

The dB-3906 TWT Amplifier (TWTA) is designed to use two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. The dB-3906 offers higher saturated output power and improved harmonic performance when compared to a single TWT approach.

Holzworth RF Synthesizers Multi-Channel Platform: HS9000 Series

Holzworth’s multi-channel RF synthesizer architecture is a complete success story. These compact, 1U high, 19in rack mountable chassis can be configured with up to 8 independently tunable channels. All integrated channels are 100% phase coherent. Holzworth has designed the multi-channel platform for integration of our HSM Series Single Channel Synthesizers to maximize channel-to-channel stability via a conductively cooled, fan-less enclosure.

Capacitance Meter

Model HP 4268A is a capacitance meter designed for testing high value multilayer ceramic capacitor (MLCC) designs

1800 W, 65 V, 1.0 – 1.1 GHz Highest Power GaN Transistor On The Market: QPD1025L

Qorvo offers the 1800 W, 65 V, 1.0 – 1.1 GHz QPD1025L as the highest GaN transistor on the market. This discrete GaN on SiC HEMT has a package that features input pre-match resulting in ease of external board match and saved board space.

Prove Field Worthiness Of EW Systems With RF Sources And Receivers

Radar simulation systems (i.e., RF sources and/or receivers) must perform to an exacting minimum standard if they are to accurately prove the field worthiness of EW systems.

26 GHz Sentinel Intelligent Signal Scanner Recording System: Talon® RTX 2684

Pentek offers the Talon® RTX 2684 as a 26 GHz sentinel intelligent signal scanner recording system. The system provides SIGINT engineers the ability to scan the RF spectrum from 1 GHz to 26 GHz for signals of interest and monitor or record bandwidths up to 500 MHz wide.

Dual-Band RF Synthesizer

The Si4133G Dual-Band RF synthesizer is a fast settling integer-N synthesizer

More Test & Measurement Solutions