Test And Measurement Products

  1. 26 GHz Sentinel Intelligent Signal Scanner Recording System: Talon® RTX 2684 2/26/2020

    Pentek offers the Talon® RTX 2684 as a 26 GHz sentinel intelligent signal scanner recording system. The system provides SIGINT engineers the ability to scan the RF spectrum from 1 GHz to 26 GHz for signals of interest and monitor or record bandwidths up to 500 MHz wide.

  2. Si8935/36/37 Isolated Delta-Sigma Modulator For Voltage Measurement 1/26/2023

    The SI893x’s 0 to 2.25 V specified input range is ideal for isolated voltage sensing. The Si8935/36/37 provides delta-sgma modulated output with flexible options for external or internally generated clock.

  3. Capacitance Meter 12/11/1998
    Model HP 4268A is a capacitance meter designed for testing high value multilayer ceramic capacitor (MLCC) designs
  4. TWT Amplifier: dB-3906 5/1/2015

    The dB-3906 TWT Amplifier (TWTA) is designed to use two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. The dB-3906 offers higher saturated output power and improved harmonic performance when compared to a single TWT approach.

  5. Si894x Isolated Delta-Sigma Modulator For Current Measurement 1/26/2023

    The Si894x is a galvanically isolated delta-sigma modulator which outputs a digital signal proportional to the voltage level at the input. 

  6. Prove Field Worthiness Of EW Systems With RF Sources And Receivers 10/13/2020

    Radar simulation systems (i.e., RF sources and/or receivers) must perform to an exacting minimum standard if they are to accurately prove the field worthiness of EW systems.

  7. Electrostatic Discharge (ESD) Testing Simulation 7/9/2019

    Electrostatic discharge testing is utilized worldwide by electronics manufacturers to determine the ESD susceptibility of their devices. It is extremely difficult to estimate the exact cost of ESD loss annually, but it can safely be stated that ESD requires the development and testing of many hardware prototypes and contributes to a high number of warranty claims and loss of consumer confidence if failure occurs in the hands of the customer. Given the high cost in time and materials associated with ESD hardware testing, the ability to simulate the ESD testing process in XFdtd is extremely valuable, allowing engineers to pinpoint locations susceptible to ESD damage and optimize ESD mitigation during the concept and design stage of product development.

  8. DC-22 GHz Distributed Amplifier: CMD240C4 7/1/2020

    Qorvo offers the CMD240C4 wideband GaAs MMIC distributed amplifier housed in a leadless 4x4 mm surface mount package. The amplifier operates from DC to 22 GHz and is ideal for radar, space, satcom, test and measurement, and electronic warfare applications.

  9. 8 – 12 GHz, 10 W GaN SPDT Switch: QPC2040 7/1/2020

    Qorvo introduces the QPC2040 single-pole, double-throw (SPDT) switch operating within the 8 – 12 GHz frequency range for commercial and military radar, communications, electronic warfare, test instrumentation, and other general purpose applications. The switch typically supports 10 W input power handling at control voltages of 0/−2 V for both CW and pulsed RF operations.

  10. Dual Instantaneous Frequency Measurement Unit: dB-9002 9/24/2020

    The dB-9002 from dB Control is a custom-mounted Dual Instantaneous Frequency Measurement (DIFM) unit designed to operate in the C, X, and Ku-band frequency range and provide highly accurate measurements at 100 ns to CW pulse width measurements.