Test And Measurement Products

  1. FFT Analyzer: EHP-50F
    6/2/2015

    The EHP-50F is a new FFT analyzer used to measure and analyze electric and magnetic strengths in the 1Hz to 400 kHz frequency range. Using the weighted peak method specified in the latest released standards, the analyzer evaluates complex signal shapes in the time domain, while providing automatic frequency evaluations for many applications including power supply stations and transformers, high-tension lines, industrial equipment, and medical technology.

  2. EMI and RFI Design Consulting
    10/23/2002

    Corry Micronics' skilled Design Engineers, with many years of industry experience, are available for consultation whenever you experience any EMI / RFI issues...

  3. Signal And Spectrum Analyzer: R&S FSW
    9/23/2011

    The new high-performance R&S® FSW signal and spectrum analyzer was developed to meet demanding customer requirements. Offering low phase noise, wide analysis bandwidth and straightforward and intuitive operation, the analyzer makes measurements fast and easy.

  4. Remote Controllable Real-Time RF/EMF Data-Logger With Powerful Integrated PC: SPECTRAN V5 RSA
    9/28/2018

    Aaronia introduces the SPECTRAN V5 RSA remote-controlled real-time spectrum analyzer designed specifically for capturing even the shortest signal transmissions. The analyzer scans 20 GHz in less than 20 mS making it world’s fastest remote controllable spectrum analyzer. It is ideal for making fast and reliable measurements for applications such as spectrum monitoring, interference hunting, EMC testing or Wi-Fi and wireless network measurements.

  5. ShockLine™ Compact USB Vector Network Analyzer: MS46122B
    11/23/2014

    The MS46122B is a series of three PC-controlled Compact ShockLine Vector Network Analyzers with a frequency range from 1 MHz to 8/20/43.5 GHz. The series benefits from patented ShockLine VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability.

    All the members of the MS46122B series are low cost full-reversing 2-port VNAs aimed at RF and microwave applications in manufacturing, engineering and education. All three MS46122B VNAs have 220 microseconds per point sweep speed and better than 100 dB dynamic range making them suitable for a variety of device test applications.

  6. R&S ESRP EMI Test Receiver and Signal/Spectrum Analyzer
    7/31/2013

    The R&S®ESRP is an EMI test receiver and signal/spectrum analyzer, all in one box. It’s been designed to measure EMI in the 10 Hz to 7 GHz frequency range, and does so using conventional stepped frequency scanning or FFT-based time domain scanning.

  7. Microwave USB Power Sensor (MA24208A)
    12/30/2015

    The MA24208A is a power sensor designed with “triple path” architecture that provides True-RMS measurements for CW, multi-tone, and digitally modulated signals from 10 MHz to 8 GHz over 80 dB of dynamic range. The sensor employs high-performance digital processing which enables measurement speeds of >1,600 continuous power readings/s continuous and >11,000 buffered readings/s. It is intended to be used to increase throughput and reduce cost-of-test in any lab, high-volume manufacturing and field environment.

  8. Inductive Probe For Non-Contacting Measurements: 1207
    2/1/2012
    This Aeroflex inductive probe is ideal for use in the repair of modern printed circuit boards and is an active probe for non-contacting measurements. Ideal for checking synthesizer frequencies and mixing products, this probe measures magnetic fields emitted by ASICs, wires, and other electronic devices. This probe features a large usable frequency range, and integrated amplifier, and a rugged design.
  9. RF And Microwave Safety Monitor: Nardalert S3
    2/15/2011
    Narda Safety Test Solutions, an L-3 Communications (NYSE: LLL) company introduces the Nardalert S3 RF and Microwave safety monitor; the world’s most accurate, versatile non-ionizing radiation (NIR) monitor for wearable and fixed-area monitoring applications. The Nardalert S3 detects electromagnetic (EM) radiation levels from 100 kHz to 50 GHz, and is the successor to the Nardalert XT, the industry-standard in wearable NIR monitors used by more commercial, aerospace and defense, and industrial organizations than all other instruments combined.
  10. RF Synthesizers Multi-Channel Platform
    7/21/2011
    Holzworth’s multi-channel RF synthesizer architecture is a complete success story. These compact, 1U high, 19in rack mountable chassis can be configured with up to 8 independently tunable channels. All integrated channels are 100% phase coherent. Holzworth has designed the multi-channel platform for integration of our HSM Series Single Channel Synthesizers to maximize channel-to-channel stability via a conductively cooled, fan-less enclosure.