Products and Services

  1. Tortoise Multi-Band Stimulus Transmitter
    1/4/2008
    Tortoise™ is a lightweight, (under 20 lbs) DC powered transmitter system composed of dual independent, transmitter modules giving the user freedom to transmit on any 2 frequency bands from anywhere without expensive and bulky additonal transmitters. Each Tortoise™ is housed in a high impact ABS water resistant case. Each transmitter module has a built-in agile frequency synthesizer, dynamically controlled power amplifier and remote control of all transmitter parameters via an IR remote controller. Remote adjustments include power level, channel or frequency assignment and transmit On/Off.
  2. Monitoring Receiver: R&S EB500
    3/18/2011

    The R&S EB500 monitoring receiver is designed to meet the demanding requirements of ITU-compliant radio monitoring tasks in stationary and mobile environments. The receiver is the ideal choice for these tasks because it is capable of operation via the front panel or remote-control software, performs high speed signal searches in the spectrum, and gathers information by means of wideband demodulation. In addition, the R&S EB500 can be used for a variety of other applications.

  3. Crocodile CDMA Transmitter
    1/25/2007
    The Crocodile™ is an ANSI-95 CDMA transmitter that is ideal for simulating a CDMA Base Station with its Pilot I and Q modulated output and assignable PN Offsets
  4. 0.5 – 18 GHz High Performance Receiver: QR026
    5/3/2016

    Teledyne’s QR026 is a high performance receiver designed to offer wide and synthesized capabilities from 500 MHz to 18 GHz, and frequency extensions up to 40 GHz. Its modular architecture allows it to be configured as a single, dual, triple, or quad channel unit, which can be used in many applications including electronic intelligence, electronic support measures, defensive aids suites, and combined ELINT/ESM sensors within ground, airborne, and naval environments.

  5. Gator Class A Stimulus Transmitter
    1/25/2007
    Each Gator™ Transmitter is housed in a high impact ABS water-resistant case. It has a built-in agile frequency synthesizer, dynamically controlled power amplifier and a built-in modem and DTMF (touch-tone) decoding allowing remote control of all transmitter parameters via a phone line or cellular telephone
  6. Wideband Miniature Digital Tuner: AM9001A
    6/10/2014

    Atlanta Micro’s AM9001A is a fully integrated, high dynamic range miniature digital tuner covering the 2 MHz to 6 GHz frequency range with an 80-MHz instantaneous bandwidth.

  7. Keyfob Transmitters
    7/5/2006
    The Linx CMD-KEY#-*** Remote Command Keyfob is ideal for general-purpose remote control and command applications. The unit has been pre-certified for FCC Part 15 compliance, which reduces costs and time to product introduction. Available in 315, 418 (standard), or 433.92MHz...
  8. Power Signal Transmitters
    6/29/1999
    Touch screen power signal transmitters for GSM 900 and DCS 1800 combine a signal generator and a 20 W power amplifier into one single lightweight unit
  9. Hybrid Transmitters
    1/5/2000
    A set of hybrid transmitters has been unleashed for short-range wireless data applications
  10. R&S® ESW EMI Test Receiver
    6/29/2016

    The R&S® ESW is an EMI test receiver featuring the widest dynamic range with a high 1 dB compression point and high sensitivity due to its low inherent noise. Designed to combine the functions of a full-featured analyzer and an EMI test receiver in one instrument, this device is capable of operation in the 2 Hz to 8 GHz, 2 Hz to 26.5 GHz, and 2 Hz to 44 GHz frequency ranges, and is ideal for demanding EMI certification measurements required in automotive and A&D markets.