Datasheet
-
GPS L2 Band Ceramic Filter: CF9737R Datasheet
3/2/2017
The CF9737R is a GPS L2 band ceramic filter ideally used with L2 receivers in industrial and commercial applications involving the L2 band. Features include a center frequency of 1227.6 MHz, a maximum insertion loss of 1.3 dB at F.O., and a 1.5 maximum VWSR in B.W.
-
GPS L1 Band Ceramic Filter: CF9735R Datasheet
3/2/2017
The CF9735R is a GPS L1 band ceramic filter ideally used with L1 receivers in industrial and commercial applications involving the L1 band. Features include a center frequency of 1575.42 MHz, a maximum insertion loss of 1.5 dB at F.O., and a 1.5 maximum VWSR in B.W.
-
V-band And E-band Microwave Diplexer Series Datasheet
1/6/2017
MtronPTI offers V-band and E-band Microwave Duplexers to enable gigabit-per-second data rates in backhaul data streams. The V-band duplexers cover 57.0 to 64.0 GHz and can deliver more than 2 Gb/s of secure data, while the E-band diplexers cover 71 to 86 GHz and deliver up to 10 Gbps of secure data, even in a dense urban environment.
-
100 MHz Low-Profile OCXO – XO5166 Series Datasheet
11/9/2016
The new XO5166 Series OCXO is a low-profile OCXO standing at 6.4 mm maximum height with a 100 MHz output frequency for military communication systems and processing subsystems. The OCXO–XO5166 features a standard DIL14 foot-print for simple integration into complex systems, and a 5 volt supply and HCMOS output that are compatible with many standard products available today.
-
High-Power Solid-State Power Amplifier Module: PA1086 Datasheet
9/29/2016
The PA1086 amplifier module operates in the 2.0 to 6.0 frequency range and is ideal for test and measurement, electronic warfare, radar, broadband jamming, and public safety applications. Features include a Class AB design, an instantaneous wide bandwidth, and a light weight, small form factor that is suitable for all modulation standards.
-
Bandpass Cavity Filter: UF9382 Datasheet
9/8/2016
The UF9382 is a high bandpass cavity filter with less than 1.5 dB passband attenuation designed to operate in applications with temperatures ranging from -40°C to +85°C. With an input power of 30dBm CW and a peak power rating of 33dBm for 500 msec, this bandpass cavity filter is able to operate in environments with 20% to 70% humidity and in air pressures ranging from 4.7psia to 15.1psia.
-
30 – 40 GHz Solid State Power Amplifier: PA3111V1 Datasheet
7/22/2016
The PA3111V1 is a solid state power amplifier (SSPA) designed with instantaneous wide bandwidth for operation within the 30 to 40 GHz frequency range. This device has a built-in protection circuits, as well as high reliability and rugged housing for more demanding applications.
-
Ultra-Low Phase Noise OCXO: XO5089 Series Datasheet
7/7/2016
The new Ultra-Low Phase Noise OCXO-XO5089 is designed for use in high performance test and measurement, SATCOM, and radar applications. It consumes less than 4.5 Watts of power, ages at -0.5 to +0.5 ppb per day, and features Allan deviation at 1 x 10-11 per second. This device uses an in-house crystal technique, and has gone through extensive characterization over temperature, shock, and vibration.
-
Solid State High Power Amplifier: PA1062 Datasheet
6/24/2016
The first task is to get your message through. The second is to prevent the other guy from getting his message through. The MtronPTI PA1062 40 Watt Solid State Power Amp provides up to 40 Watts of CW power across the full bandwidth and less than 4.0 dBP-P gain flatness to meet the needs of broadband spectrum control.
-
Solid State High Power Amplifier: PA1049 Datasheet
6/24/2016
This solid state, high-power amplifier is well-suited for broadband jamming and LTE laboratory test equipment applications. It covers the 2.0 to 6.0 GHz range and provides 50 Watts of output power.