Datasheet
-
Ultra-Low Jitter Quad Output Oscillator: M9200 Datasheet
10/14/2015
The M9200 is an ultra-low jitter quad output oscillator designed to increase overall performance and accelerate time-to-market while eliminating usage of external components for high-speed switching applications in datacom, telecom, and server markets. This oscillator integrates a clock and buffer into the same package with measured output performance, and a best in class maximum RMS jitter specification of 100fs.
-
Ultra-Low Phase Noise OCXO – XO5085 Datasheet
9/30/2015
The new Ultra-Low Phase Noise OCXO – XO5085 from MtronPTI is one of the lowest phase noise OCXOs in the industry. The OCXO – XO5085 consumes less than 2.5 Watts of power, has a high stability of +/-100ppb over -0 to +70 DC, and is completely RoHS compliant. This device can be used in high performance test and measurement, SATCOM, and Radar applications.
-
Ultra-Low Phase Noise OCXO-XO5123 Datasheet
9/22/2015
The Ultra-Low Phase Noise OCXO-XO5123 device is available in the 10 to 40 MHz output frequency range. It consumes less than 2.5 Watts of power, ages less than +/- 0.5ppm for all causes, and features Allan deviation better than 5 x 10-12.
-
Ultra-low Jitter Oscillators: M2060/M2061 Series Datasheet
6/1/2015
The M2060/M2061 ultra-low jitter oscillators offer a significant improvement in signal-to-noise ratio and a frequency range of 20 MHz to 220 MHz in LVPECL and LVDS formats with less than 100 fs RMS jitter. Utilizing high performance 3rd overtone crystal technology, these Jitter Oscillators are intended to be used in high performance timing applications including 10/40/100/400G Ethernet, 100G optical transport and reference clock for ASIC and FPGA for Datacom and other markets.
-
Ultra-low Jitter Oscillators: M2058/M2059 Series Datasheet
6/1/2015
The M2058/M2059 ultra-low jitter oscillators offer a significant improvement in signal-to-noise ratio and a frequency range of 20 MHz to 220 MHz in LVPECL and LVDS formats with less than 100 fs RMS jitter. Utilizing high performance 3rd overtone crystal technology, these Jitter Oscillators are intended to be used in high performance timing applications including 10/40/100/400G Ethernet, 100G optical transport and reference clock for ASIC and FPGA for Datacom and other markets.
-
Digitally Tunable LC Filter: TF0113 Series Datasheet
5/6/2015
MtronPTI’s TF0113 Series of Digitally Tunable LC Filters are available in multiple frequency ranges and pin compatible with existing multi-channel digitally tunable filters. The series offers lower insertion loss, low IP3 distortion and flat passband ripple to make the most of dynamic digital RF modulation schemes.
-
Solid State High Power Amplifier: PA1044 Datasheet
11/18/2014
The PA1044 is a high power amplifier covering the 1.0 to 6.0 GHz range. It features a 100 Watt output power, 50 dB gain, and a class AB GaN design.
-
Solid State High Power Amplifier: PA1016 Datasheet
11/18/2014
The PA1016 high power amplifier by MtronPTI covers the 2.0 to 6.0 GHz range and is ideal for broadband jamming, LTE laboratory testing, and public safety and military communication applications.
-
Solid State High Power Amplifier: PA1068 Datasheet
11/18/2014
This solid state power amplifier covers the 6-18 GHz frequency range and features 10 Watts of output power, 40 dB gain, and 12 Volt operation. Like the other amplifiers in MtronPTI’s broadband series, the PA1068 is well-suited for broadband jamming, electronic warfare, and EMI/EMC test equipment applications.
-
Solid State High Power Amplifier: PA1052 Datasheet
11/18/2014
This solid state power amplifier covers the 6-18 GHz frequency range and features 20 Watts of output power, 43 dB gain, and 12 Volt operation. It’s ideal for tactical communications, satellite terminals, electronic warfare, radar, point-to-point backhaul, medical, industrial, and scientific applications.