Datasheet
-
C-Band Cavity Diplexer/Splitter Assembly: UFDX9999-002 Datasheet
8/24/2020
MtronPTI offers the UFDX9999-002 C-band cavity diplexer/splitter assembly designed to support satellite applications. An integrated diplexer/splitter enables a 25% reduction of the board space required.
-
SMD Stratum 3 TCXO: M6071 Series Datasheet
4/7/2020
The Stratum 3 M6071 series of TCXOs is ideally designed for operation from 10 to 40 MHz frequencies for satcom, telecom, milcom, and other test and measurement applications. These TCXOs deliver industry leading stability as low as ±0.1 ppm over temperature ranges as wide as -40 ˚C to +105 ˚C.
-
MtronPTI XO9014 OCXO Series Datasheet
1/31/2020
The XO9014 series OCXO is designed for use as a timing reference for various applications that include Instrumentation, downhole seismic, industrial controls, datacom, utility metering and satcom applications. The XO9014 series offers temperature stability of less than +/-10.0ppb, over an operating temperature of -40°C to +85°C. It operates over the 10 MHz to 40 MHz frequency range.
-
Ku‐Band 50W Diplexer: UFDX9999 Datasheet
8/8/2019
The UFDX9999 Ku Band high power diplexers incorporating highly selective high power handling bandpass filters for simultaneous transmit and receive operation with outstanding isolation between uplink and downlink feeds. They are ideally used for satcom and electronic warfare applications.
-
Low Profile X And Ku Band Cavity Filters Datasheet
2/19/2019
MtronPTI incorporates RF CAD design and synthesis into their X and Ku band low profile cavity filters. These low-profile, laser-sealed filters are designed to not only reduce the overall mechanical footprint, but also offer improved electrical performance in space, SATCOM, EW and avionics applications.
-
Extended Temperature, High Stability OCXO: XO517X Series Datasheet
7/19/2018
The XO517X Series of extended temperature, high stability OCXOs is designed to be used as timing references for use in extreme environments. The OCXOs operate at 10 MHz or 40 MHz, offer low phase noise, and feature low aging and EAR99 classification. Ideal applications include satcom, troposcatter communications, downhole seismic, high temperature industrial, as well as other extended temperature military, aerospace, and avionics applications.
-
PLL OCXO With Multi-Output Frequency References: XO8085 Datasheet
6/19/2018
The XO8085 PLL OCXO platform is integrated with multi-output frequency references, enabling system designers to employ one small package instead of using multiple OCXOs. This high-stability, ultra-low phase noise OCXO is characterized by low G-sensitivity, and provides a noise floor approaching -180dBc/Hz and close-in performance of -130dBc/Hz or better at 100 Hz offset.
-
High Power LC Diplexer Assembly Datasheet
5/29/2018
The new high power LC diplexer assembly is designed for a variety of applications, including avionics, electronic warfare, space, and satellite communications. With high power, better isolation/RF shielding, and low insertion loss, these diplexers reduce the overall mechanical footprint, and improved electrical performance and power handling.
-
High Power Switched LC Filter Assembly Datasheet
5/18/2018
MtronPTI’s a high power switched LC filter assembly designed to reduce the overall mechanical footprint, and improve electrical performance and power handling. Available in multiple frequency ranges, the lumped element filter assemblies are optimized for avionics, electronic warfare, and software defined radio applications.
-
MtronPTI Iridium Band Filter Datasheet
5/8/2018
The MtronPTI Iridium Band Filters are designed for aviation, maritime, land mobile, IoT, and military communications applications. These narrow bandwidth, high rejection band filters are designed to isolate Iridium frequencies from outside interference. The Iridium band filters operate with a maximum insertion loss of 2.0 dB while achieving required rejection levels outside the Iridium band.