Products and Services
-
Log Periodic Antenna: SAS-515
11/16/2008
The A.H. Systems' SAS-515 Log Periodic Antenna is lightweight, compact and has been manufactured to ensure maximum gain and low VSWR. Whether testing inside a shielded enclosure or outdoors, this antenna will display efficient performance characteristics through the frequency range of 120 MHz to 4000 MHz.
-
Transmit/Receive Front-End Module: SKY65377-11
5/21/2015
The SKY65377-11 is a transmit/receive (T/R) front-end module designed to provide a complete T/R train with T/R switches. Mounted in a 28-pin, 6x6mm Multi-Chip Module (MCM) surface-mount technology package, this device provides a highly manufacturable low-cost solution for many transmit/receive applications.
-
PCBA-Assembly Capabilities
10/23/2008
Abante offers a full spectrum of PCBA services, including related turnkey offerings.
-
Standard Gain Horn Antenna 26.5 GHz to 40 GHz:SAS-588
11/12/2008
The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor.
-
MADRMA0001 Family Of Quad Bias Drivers
1/24/2006
The MADRMA0001 family of quad bias drivers can either be configured to translate TTL signals into the negative voltages required for GaAs FET switches or attenuators or they can be used to produce up to ± 40 mA per channel for biasing series or shunt PIN diode switches...
-
Low Power OCXO: VFOV400
4/29/2010
CTS Electronic Components introduces the VFOV400 Series OCXO that offers extremely low power consumption (120mW), 35 second warm up time, ± 5 ppb stability, and exceptional phase noise in a very compact package.
-
Bluetooth Modules And Adapters
6/5/2008
The range of Bluetooth Intelligent Serial Modules from EZURiO, A Unit Of Laird Technologies, provide the most robust, high performance and fastest route to embedding Bluetooth into your own product design.
-
Rear Mount Bulkhead SMA Connectors
11/21/2008
SMA connectors, short for SubMiniature Version A, are semi-precision, subminiature devices that provide repeatable electrical performance from DC to 12.4 GHz with flexible cable. SMA connectors feature screw-type coupling. Semi-Rigid cabling extends the frequency range of the device to 18GHz. SMA connectors offer broadband performance with low reflections and constant 50 ohm impedance. These properties, along with minimum attenuation and low VSWR have made the SMA connector extremely popular in the microwave community. LTI SMA connectors are designed to conform to MIL-C-39012 specifications.
-
GNSS Filter/LNA Front End Module: ANGP-F001
9/26/2012
The ANGP-F001 combines a low-noise amplifier (LNA) with a GNSS FBAR pre-LNA filter. This module features a very low noise figure, a CMOS compatible shutdown pin (SD), advanced GaAs E-pHEMT and FBAR technology, exceptional Cell/DCS/PCS/WLAN-Band rejection, and more.
-
Noisecom UFX7000A Series: Analog Noise Generators
2/27/2008
The UFX7000A Series instruments provide Broadband Gaussian noise with superior flatness. The output power can be attenuated up to 127 dB in 1 dB steps, and several connector types are available.