Products and Services

  1. Transceiver Test Systems 7/1/2008

    The transceiver test system is the latest addition to JFW Industries' line of RF test systems. Its unique omni-directional design allows for complete interconnectivity and amplitude control, making it an ideal solution for transceiver testing.

  2. 2000 MTT-S: Toshiba Introduces Internally Matched C-Band Power GaAs FETs 6/13/2000
    A new series of internally matched C-Band Gallium Arsenide (GaAs) FETs spans the 4 W to 25 W power range
  3. 0.5-8.0 GHz Dual Directional Coupler: 500508010 11/14/2013

    This dual-directional coupler covers the 0.5 to 8 GHz frequency range and is ideal for use in signal measurement and monitoring, cable distributed systems, antenna beam forming, and military and EMC testing.

  4. Low Noise Amplifier (0.01 GHz To 10 GHz): HMC8411 4/5/2021

    Analog Devices' HMC8411 is a LNA that supports defense and aerospace applications. Housed in a RoHS-compliant, 2 mm × 2 mm, 6-lead LFCSP, this product provides a typical gain of 15.5 dB, a 1.7 dB typical noise figure, and a typical output third-order intercept (OIP3) of 34 dBm, requiring only 55 mA from a 5 V supply voltage. 

  5. Smart Switch: Si830x 5/10/2023

    The Si830x provides four high-side or low-side switches with low RON. These switches are ideal for driving resistive and inductive loads like solenoids, relays, and lamps commonly found in industrial control systems like Programmable Logic Controllers (PLC).

  6. Externally Terminated Switch: C30/C60 Series 11/28/2023

    The innovative C30-C60 Series of Multi-Position coaxial switches delivers outstanding RF Performance across the DC – 40 GHz spectrum.

  7. L-Band Planar Array Antennas 5/9/2014

    These transmit and receive L-band planar array antennas feature 14 dB gain, a wide bandwidth, linear polarization, and low return loss. They’re ideal for use in point-to-point applications, in RF transmitters and receivers, and in satellite communications.

  8. 20 - 40 GHz 2 Watt GaN Power Amplifier: QPA2040D 11/13/2023

    The QPA2040D is a Ka-band power amplifier fabricated on 0.15um GaN on SiC process (QGaN15). Operating between 20 and 40GHz, it achieves saturated output power of 2W with power-added efficiency of 13%.

  9. BNC Attenuator Kit (120083) 1/23/2009
    BNC Attenuator Kit (120083)by Digi-Key.
  10. 1P2T Failsafe Switch: 75S-111 9/27/2007

    Model 75S-111 is a 75 Ohm electro-mechanical 1P2T RF switch operating DC-2150 MHz.  The 1P2T is failsafe and absorptive (i.e. self-terminating).  The unused port will self-terminate at 75 Ohm impedance.  Available with 75 Ohm RF connectors:  BNC, F or TNC.  This 1P2T RF switch has one control line.  The control line is activated with +12 Vdc signal level.