Product/Service

3 – 1000 MHz 75 Ohm Matrix Switch With 2 x 8 Blocking: 75MS-029

292-391-600x600

JFW offers the 75MS-029 75 Ohm blocking matrix switch that operates from 3 – 1000 MHz. This switch can be used to fan-out connections from a 2-port 75 Ohm network analyzer to allow for automated multi-port 75 Ohm testing. 

The unused output ports are self-terminating at 75 Ohm impedance to keep the DUT properly impedance matched at all times.  It is remotely controlled via serial or TCP/IP connections.  The remote command set consists of simple ASCII formatted commands.  The remote command set for our 3.x.x firmware is available for download. 

For more in-depth information, download the datasheet and drawing.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information